[Thu Jul 19 10:29:48 2012] Detection parameters:
  Position = (414.5, 404.7) = 11 34 37.95 70 15 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.5 +/- 13.6
  Background counts = 15.7
  Rate = 0.008 +/- 0.002

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 11.41'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Thu Jul 19 12:51:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 25, frac = 0.578
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 12.13"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src27.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src27.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jul 19 18:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu Jul 19 18:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 37.027900, observed total counts = 37.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 2 = 1.908006 pixels
[Thu Jul 19 18:05:33 2012] Warning, changing simple spatial fit ID from 27 to 11
[Thu Jul 19 18:05:33 2012] 21.572000 total counts/ 0.000000 bgd. counts: snr = 2595510167870059.500000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.908006 pixels
  Position = (415.3, 402.9) = 11 34 37.25 70 15 31.0
  Extent = 23.6 (23.0-23.8)", rotation angle = 0
  Source counts = 21.6 +/- 4.6
  Background counts = 0.0
  Rate = 0.006 +/- 0.001
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 18:05:33 2012] Deleting source due to low Poisson probability 0.9