[Thu Jul 19 10:29:49 2012] Detection parameters:
  Position = (259.3, 473.1) = 11 36 51.34 70 20 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.3 +/- 11.1
  Background counts = 7.4
  Rate = 0.007 +/- 0.001

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 12.98'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Thu Jul 19 12:51:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 12.92"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src39.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src39.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src39.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Jul 19 18:05:09 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Jul 19 18:05:09 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Jul 19 18:05:33 2012] Warning, spatial fit 39 centroid is now closest to src. 22
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Thu Jul 19 20:06:28 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 12.92"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src31.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src31.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jul 19 22:56:38 2012] Warning, spatial fit 31 centroid is now closest to src. 22
[Thu Jul 19 22:56:38 2012] Source 19 is offset by -7.550820 and 0.564270 pixels which is larger than
2 X fitted extent = 1.652662 x 1.652662, not incorporating fit results
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 22:56:38 2012] Source is confused with source 4
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(22512.746857, 41109.307495, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src19_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (222, 436) - (297, 511)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(22512.746857, 41109.307495, 1087.500000, 2175.000000, X, Y) && !ellipse(23814.834290, 41976.304657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21589.264800, 41985.814000, 2002.680058, 2002.680058, 0.000000, X, Y) && !ellipse(22866.577301, 40394.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.738525, 42492.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.179855, 41435.055695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.295944, 40227.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22088.373611, 43273.384705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21665.153976, 38594.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20005.000000, 41359.360809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23202.433197, 41806.433228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.996323, 39678.674164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21529.892181, 40920.667664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src19.gif
[Fri Jul 20 01:15:50 2012] Mean detx,y = (-11172.92, 7780.28) 
[Fri Jul 20 01:15:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:16:05 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:16:05 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul 20 01:16:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jul 20 01:55:54 2012] Not generating rmf since there are only 55 counts
[Fri Jul 20 01:55:54 2012] rmf not generated due to insufficient counts
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul 20 01:59:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:08 2012] Using photon index=1.80, rate=0.00696, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src19.arf
[Fri Jul 20 01:59:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:08 2012] Updating source flux to 1.5e-13
[Fri Jul 20 01:59:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting