[Thu Jul 19 10:29:48 2012] Detection parameters:
  Position = (288.4, 318.9) = 11 36 26.17 70 9 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23180.1 +/- 180.4
  Background counts = 45.6
  Rate = 3 +/- 0.02

[Thu Jul 19 10:29:51 2012] Off-axis axis estimate = 1.65'
[Thu Jul 19 12:51:45 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 12:51:45 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jul 19 12:51:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Thu Jul 19 12:51:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 18:05:07 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 19 18:05:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 18:05:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 19 18:05:08 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 19 18:05:08 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 19 18:05:33 2012] Spatial fit model total counts = 11460.900000, observed total counts = 11167.000000
[Thu Jul 19 18:05:33 2012] Offset between fit and detection position for source 1 = 0.232177 pixels
[Thu Jul 19 18:05:33 2012] 11484.530000 total counts/ 2446.570000 bgd. counts: snr = 182.722316
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.232177 pixels
  Position = (288.3, 318.7) = 11 36 26.31 70 9 26.3
  Extent = 6.9 (6.8-7.0)", rotation angle = 0
  Source counts = 9038.0 +/- 107.2
  Background counts = 2446.6
  Rate = 2 +/- 0.03
[Thu Jul 19 18:05:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 18:05:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 18:05:33 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 18:05:33 2012] Source does appear to be extended
[Thu Jul 19 18:05:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:06:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 20:06:28 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Thu Jul 19 20:06:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Thu Jul 19 20:06:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.88"
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 22:56:18 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 19 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 22:56:19 2012] fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 22:56:19 2012] Fit fullrun_mos2_xmm0094170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 22:56:38 2012] Spatial fit model total counts = 11464.000000, observed total counts = 11167.000000
[Thu Jul 19 22:56:38 2012] Offset between fit and detection position for source 1 = 0.000580 pixels
[Thu Jul 19 22:56:38 2012] 11487.310000 total counts/ 2442.810000 bgd. counts: snr = 182.995209
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000580 pixels
  Position = (288.3, 318.7) = 11 36 26.31 70 9 26.3
  Extent = 6.9 (6.8-7.0)", rotation angle = 0
  Source counts = 9044.5 +/- 107.2
  Background counts = 2442.8
  Rate = 2 +/- 0.03
[Thu Jul 19 22:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 22:56:38 2012] Source does appear to be extended
[Thu Jul 19 22:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:03:47 2012] Counts = 9044.500000, rescaling region sizes by 2.000000
[Fri Jul 20 01:03:47 2012] XMMSAS src. selection expression = ellipse(25030.698400, 27679.378800, 824.692824, 824.692824, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing source region out to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 01:03:47 2012] Extracting stamp from image fullrun_mos2_xmm0094170101_pi300-10000_cl_sm2.00.img.gz, (241, 271) - (336, 366)
[Fri Jul 20 01:03:47 2012] XMMSAS bgd. selection expression = annulus(25030.698400, 27679.378800, 2748.976079, 5497.952158, X, Y) && !ellipse(25778.108000, 28950.906000, 1210.552035, 1210.552035, 0.000000, X, Y) && !ellipse(26432.502014, 27959.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25207.171478, 28551.695953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.380737, 22990.243256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.850000, 23578.466000, 1475.112042, 1475.112042, 0.000000, X, Y) && !ellipse(20178.782288, 23430.768372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29133.261536, 32315.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.010513, 26174.013672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24272.630371, 28980.023865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18861.335510, 24297.486755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20068.056946, 23781.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28464.645508, 32789.483795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.863556, 33659.112091, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 01:03:47 2012] Writing fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 01:03:50 2012] Mean detx,y = (-25.41, -86.43) 
[Fri Jul 20 01:03:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:04:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:04:08 2012] Setting source spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 01:04:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 01:59:07 2012] Updating aperture counts using extracted products
[Fri Jul 20 01:59:07 2012] Error reading totcts from fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 01:59:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:07 2012] Using photon index=1.80, rate=2.39, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 01:59:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:07 2012] Updating source flux to 2.5e-11
[Fri Jul 20 01:59:41 2012] Reading fit data from xmm0094170101/analysis//spectral/fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 20 01:59:41 2012] Spectral fit parameter nH value = 3.82792e+20
[Fri Jul 20 01:59:41 2012] Spectral fit parameter PhoIndex value = 2.4193
[Fri Jul 20 01:59:41 2012] Failed to get F(0.3-8.0) from xmm0094170101/analysis//spectral/fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 01:59:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 01:59:41 2012] Using Nh = 3.8e+20, photon index=2.42, rate=2.39, arf fullrun_mos2_xmm0094170101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 01:59:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 01:59:41 2012] Updating source flux to 2e-11