[Tue Jul 31 04:57:37 2012] Detection parameters:
  Position = (121.0, 330.9) = 17 14 30.07 -39 45 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 649.4 +/- 32.0
  Background counts = 18.9
  Rate = 0.05 +/- 0.002

[Tue Jul 31 04:57:37 2012] Off-axis axis estimate = 13.08'
[Tue Jul 31 06:10:12 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 06:10:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 06:10:12 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Tue Jul 31 06:10:12 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Tue Jul 31 06:10:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.97"
[Tue Jul 31 06:37:10 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 31 06:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_src2.csv
[Tue Jul 31 06:37:10 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 31 06:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_src2.csv
[Tue Jul 31 06:37:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 06:37:10 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 31 06:37:10 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 31 06:37:10 2012] Fit fullrun_mos1_xmm0093670501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jul 31 06:55:10 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.791089 pixels away
[Tue Jul 31 06:55:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 06:55:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 06:55:10 2012] Assessing source extent using major
[Tue Jul 31 06:55:10 2012] Source does appear to be extended
[Tue Jul 31 06:55:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 07:49:19 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 07:49:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 07:49:19 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Tue Jul 31 07:49:19 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Tue Jul 31 07:49:19 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.97"
[Tue Jul 31 08:17:38 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul 31 08:17:38 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul 31 08:17:38 2012] Fit fullrun_mos1_xmm0093670501_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jul 31 08:17:38 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul 31 08:17:38 2012] fullrun_mos1_xmm0093670501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul 31 08:17:38 2012] Fit fullrun_mos1_xmm0093670501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jul 31 08:40:46 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.763566 pixels away
[Tue Jul 31 08:40:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 08:40:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 08:40:46 2012] Assessing source extent using major
[Tue Jul 31 08:40:46 2012] Source does appear to be extended
[Tue Jul 31 08:40:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 08:53:31 2012] XMMSAS src. selection expression = ellipse(10480.184616, 28738.041840, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 31 08:53:31 2012] Writing source region out to fullrun_mos1_xmm0093670501_pi300-10000_pass1_cl_src6_src.reg
[Tue Jul 31 08:53:31 2012] Extracting stamp from image fullrun_mos1_xmm0093670501_pi300-10000_cl_sm2.00.img.gz, (84, 293) - (159, 368)
[Tue Jul 31 08:53:31 2012] XMMSAS bgd. selection expression = annulus(10480.184616, 28738.041840, 1087.500000, 2175.000000, X, Y)
[Tue Jul 31 08:53:31 2012] Writing fullrun_mos1_xmm0093670501_pi300-10000_pass1_cl_src6.gif
[Tue Jul 31 08:53:52 2012] Mean detx,y = (-5167.42, 13880.10) 
[Tue Jul 31 08:53:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 08:54:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 08:54:07 2012] Setting source spectrum file to fullrun_mos1_xmm0093670501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 31 08:54:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093670501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jul 31 09:01:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 31 09:01:21 2012] rmf not generated due to insufficient counts
[Tue Jul 31 09:28:56 2012] Updating aperture counts using extracted products
[Tue Jul 31 09:28:56 2012] Error reading totcts from fullrun_mos1_xmm0093670501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jul 31 09:28:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 09:28:56 2012] Using photon index=1.80, rate=0.0476, arf fullrun_mos1_xmm0093670501_pi300-10000_pass1_cl_src6.arf
[Tue Jul 31 09:28:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 09:28:56 2012] Updating source flux to 1e-12
[Tue Jul 31 09:28:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting