[Fri Jul  5 01:12:53 2013] Detection parameters:
  Position = (268.6, 346.4) = 17 15 37.07 -39 55 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.4 +/- 12.9
  Background counts = 21.7
  Rate = 0.009 +/- 0.001

[Fri Jul  5 01:12:53 2013] Off-axis axis estimate = 4.10'
[Fri Jul  5 01:13:02 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Fri Jul  5 01:13:02 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Fri Jul  5 01:13:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Fri Jul  5 01:13:02 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.48"
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src1.csv
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src1.csv
[Fri Jul  5 01:13:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul  5 01:13:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  5 01:13:07 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.618072 pixels away
[Fri Jul  5 01:13:07 2013] Vigneting correction estimate = 1.000000
[Fri Jul  5 01:13:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  5 01:13:07 2013] Assessing source extent using major
[Fri Jul  5 01:13:07 2013] Source does appear to be extended
[Fri Jul  5 01:13:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  5 01:13:12 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Fri Jul  5 01:13:12 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Fri Jul  5 01:13:12 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Fri Jul  5 01:13:12 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.48"
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul  5 01:13:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src1.csv
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul  5 01:13:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src1.csv
[Fri Jul  5 01:13:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul  5 01:13:12 2013] Fit fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul  5 01:13:16 2013] Spatial fit model total counts = 264.440000, observed total counts = 242.000000
[Fri Jul  5 01:13:16 2013] Offset between fit and detection position for source 2 = 0.196048 pixels
[Fri Jul  5 01:13:16 2013] 259.601900 total counts/ 202.538000 bgd. counts: snr = 4.009666
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.196048 pixels
  Position = (268.4, 346.5) = 17 15 37.13 -39 55 60.0
  Extent = 3.5 (2.7-4.5)", rotation angle = 0
  Source counts = 57.1 +/- 16.1
  Background counts = 202.5
  Rate = 0.004 +/- 0.001
[Fri Jul  5 01:13:16 2013] Vigneting correction estimate = 1.000000
[Fri Jul  5 01:13:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  5 01:13:16 2013] Assessing source extent using major axis lower bound
[Fri Jul  5 01:13:16 2013] Source does appear to be extended
[Fri Jul  5 01:13:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  5 01:13:22 2013] XMMSAS src. selection expression = ellipse(23301.934200, 30097.205600, 211.036206, 211.036206, 0.000000, X, Y)
[Fri Jul  5 01:13:22 2013] Not overwriting source region fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul  5 01:13:22 2013] Extracting stamp from image fullrun_mos2_xmm0093670401_pi300-10000_cl_sm2.00.img.gz, (256, 334) - (281, 359)
[Fri Jul  5 01:13:22 2013] XMMSAS bgd. selection expression = annulus(23301.934200, 30097.205600, 351.727010, 703.454020, X, Y)
[Fri Jul  5 01:13:22 2013] Writing fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2.gif
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/events/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0093670401/products/events/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Jul  5 01:13:22 2013] Mean detx,y = (-1051.44, -6019.25) 
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/images/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src.img and ../../xmm0093670401/products/images/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/spectra/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0093670401/products/spectra/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Jul  5 01:13:22 2013] Setting source spectrum file to fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  5 01:13:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/lightcurves/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0093670401/products/lightcurves/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Jul  5 01:14:45 2013] Not generating rmf since there are only 57 counts
[Fri Jul  5 01:14:45 2013] rmf not generated due to insufficient counts
[Fri Jul  5 01:21:54 2013] Updating aperture counts using extracted products
[Fri Jul  5 01:21:54 2013] Total counts from fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 73.00
[Fri Jul  5 01:21:54 2013] Total counts from fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 108.00
[Fri Jul  5 01:21:54 2013] Got source and background scale factors 137600.000000, 1043582.000000
[Fri Jul  5 01:21:54 2013] User source parameters:
  Position = (268.4, 346.5) = 17 15 37.13 -39 55 60.0
  Extent = 3.5 (2.7-4.5)", rotation angle = 0
  Source aperture counts = 58.8 +/- 9.6
  Background aperture counts = 14.2
  Rate = 0.004 +/- 0.0007

[Fri Jul  5 01:21:55 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul  5 01:21:55 2013] Using photon index=1.80, rate=0.00437, arf fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2.arf
[Fri Jul  5 01:21:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  5 01:21:55 2013] Updating source flux to 1.6e-13
[Fri Jul  5 01:21:57 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul  5 01:21:58 2013] xmm0093670401/analysis//spectral/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete