[Fri Jul  5 01:12:53 2013] Detection parameters:
  Position = (253.1, 190.6) = 17 15 42.97 -40 7 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.6 +/- 9.7
  Background counts = 9.6
  Rate = 0.007 +/- 0.001

[Fri Jul  5 01:12:53 2013] Off-axis axis estimate = 8.48'
[Fri Jul  5 01:13:02 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Fri Jul  5 01:13:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  5 01:13:02 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Jul  5 01:13:02 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Fri Jul  5 01:13:02 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.67"
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src2.csv
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src2.csv
[Fri Jul  5 01:13:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jul  5 01:13:02 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul  5 01:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jul  5 01:13:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  5 01:13:07 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.782983 pixels away
[Fri Jul  5 01:13:07 2013] Vigneting correction estimate = 1.000000
[Fri Jul  5 01:13:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  5 01:13:07 2013] Assessing source extent using major
[Fri Jul  5 01:13:07 2013] Source does appear to be extended
[Fri Jul  5 01:13:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  5 01:13:12 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Fri Jul  5 01:13:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  5 01:13:12 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Jul  5 01:13:12 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Fri Jul  5 01:13:12 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.67"
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul  5 01:13:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src2.csv
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul  5 01:13:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src2.csv
[Fri Jul  5 01:13:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul  5 01:13:12 2013] fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul  5 01:13:12 2013] Fit fullrun_mos2_xmm0093670401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul  5 01:13:16 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.631772 pixels away
[Fri Jul  5 01:13:16 2013] Vigneting correction estimate = 1.000000
[Fri Jul  5 01:13:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  5 01:13:16 2013] Assessing source extent using major
[Fri Jul  5 01:13:16 2013] Source does appear to be extended
[Fri Jul  5 01:13:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  5 01:13:22 2013] XMMSAS src. selection expression = ellipse(21970.429245, 16529.817551, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  5 01:13:22 2013] Not overwriting source region fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src.reg
[Fri Jul  5 01:13:22 2013] Extracting stamp from image fullrun_mos2_xmm0093670401_pi300-10000_cl_sm2.00.img.gz, (216, 153) - (291, 228)
[Fri Jul  5 01:13:22 2013] XMMSAS bgd. selection expression = annulus(21970.429245, 16529.817551, 1087.500000, 2175.000000, X, Y) && !ellipse(20215.718000, 18630.398000, 1687.592049, 1687.592049, 0.000000, X, Y)
[Fri Jul  5 01:13:22 2013] Writing fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12.gif
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/events/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0093670401/products/events/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Jul  5 01:13:22 2013] Mean detx,y = (-3509.93, 7321.49) 
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/images/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src.img and ../../xmm0093670401/products/images/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/spectra/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0093670401/products/spectra/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Jul  5 01:13:22 2013] Setting source spectrum file to fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jul  5 01:13:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jul  5 01:13:22 2013] ../../xmm0093670401/products/lightcurves/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0093670401/products/lightcurves/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Jul  5 01:14:47 2013] Not generating rmf since there are only 50 counts
[Fri Jul  5 01:14:47 2013] rmf not generated due to insufficient counts
[Fri Jul  5 01:21:54 2013] Updating aperture counts using extracted products
[Fri Jul  5 01:21:54 2013] Total counts from fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 114.00
[Fri Jul  5 01:21:54 2013] Total counts from fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_bgd.pi.gz = 550.00
[Fri Jul  5 01:21:54 2013] Got source and background scale factors 1225904.000000, 8398400.000000
[Fri Jul  5 01:21:54 2013] User source parameters:
  Position = (253.1, 190.6) = 17 15 42.97 -40 7 19.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 33.7 +/- 11.7
  Background aperture counts = 80.3
  Rate = 0.003 +/- 0.0009

[Fri Jul  5 01:21:54 2013] Updating counts from extracted products
[Fri Jul  5 01:21:54 2013] Set source signif. to 33.72/8.96 = 3.76
[Fri Jul  5 01:21:55 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul  5 01:21:55 2013] Using photon index=1.80, rate=0.00258, arf fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12.arf
[Fri Jul  5 01:21:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  5 01:21:55 2013] Updating source flux to 7.7e-14
[Fri Jul  5 01:21:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul  5 01:21:58 2013] xmm0093670401/analysis//spectral/fullrun_mos2_xmm0093670401_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete