[Sun Aug 19 10:16:37 2012] Detection parameters:
  Position = (304.9, 320.0) = 17 11 54.79 -39 55 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.2 +/- 20.5
  Background counts = 107.5
  Rate = 0.01 +/- 0.002

[Sun Aug 19 10:16:38 2012] Off-axis axis estimate = 1.63'
[Sun Aug 19 10:21:54 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:21:54 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Aug 19 10:21:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sun Aug 19 10:21:54 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 7.25"
[Sun Aug 19 19:19:01 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src98.ximg exists
[Sun Aug 19 19:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src98.csv
[Sun Aug 19 19:19:01 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src98_1.ximg exists
[Sun Aug 19 19:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src98.csv
[Sun Aug 19 19:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:19:05 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sun Aug 19 19:19:05 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sun Aug 19 19:19:05 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Mon Aug 20 06:41:15 2012] Warning, spatial fit 98 centroid is now closest to src. 96
[Mon Aug 20 06:41:15 2012] Source 98 is offset by 6.588811 and 3.723150 pixels which is larger than
2 X fitted extent = 6.316920 x 6.316920, not incorporating fit results
[Mon Aug 20 06:41:15 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:15 2012] Assessing source extent using major
[Mon Aug 20 06:41:15 2012] Source does appear to be extended
[Mon Aug 20 06:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:15 2012] Source is confused with source 96
[Mon Aug 20 06:42:25 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:42:25 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Aug 20 06:42:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Mon Aug 20 06:42:25 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 7.25"
[Mon Aug 20 16:13:10 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src80.ximg exists
[Mon Aug 20 16:13:10 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src80_1.ximg exists
[Mon Aug 20 16:13:10 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src80 appears to have run properly
[Mon Aug 20 16:13:13 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Mon Aug 20 16:13:13 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Mon Aug 20 16:13:13 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Tue Aug 21 03:39:40 2012] Warning, spatial fit 80 centroid is now closest to src. 51
[Tue Aug 21 03:39:40 2012] Source 98 is offset by 6.748535 and 3.723150 pixels which is larger than
2 X fitted extent = 6.316920 x 6.316920, not incorporating fit results
[Tue Aug 21 03:39:40 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:39:40 2012] Assessing source extent using major
[Tue Aug 21 03:39:40 2012] Source does appear to be extended
[Tue Aug 21 03:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 03:41:04 2012] XMMSAS src. selection expression = ellipse(26476.798523, 27794.986053, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 03:41:04 2012] Writing source region out to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src98_src.reg
[Tue Aug 21 03:41:04 2012] Extracting stamp from image fullrun_pn_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (267, 283) - (342, 358)
[Tue Aug 21 03:41:04 2012] XMMSAS bgd. selection expression = annulus(26476.798523, 27794.986053, 1087.500000, 2175.000000, X, Y) && !ellipse(28842.384000, 28489.978000, 1560.976045, 1560.976045, 0.000000, X, Y) && !ellipse(27731.010468, 29138.518494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29205.582400, 28023.607800, 1287.752037, 1287.752037, 0.000000, X, Y) && !ellipse(27897.584351, 27094.560120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.730000, 26492.394000, 1111.264032, 1111.264032, 0.000000, X, Y) && !ellipse(28762.093750, 26306.350952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.948944, 25434.707489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21631.646000, 30492.866000, 2717.216078, 2717.216078, 0.000000, X, Y) && !ellipse(28418.100189, 27523.047333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29264.007600, 27713.164000, 1266.704036, 294.272808, 296.424000, X, Y) && !ellipse(26979.170000, 27548.590000, 1133.800033, 1133.800033, 0.000000, X, Y) && !ellipse(29287.830000, 26771.322000, 1220.128035, 1220.128035, 0.000000, X, Y) && !ellipse(26844.753723, 25351.705963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.839935, 24831.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.627200, 25048.671400, 914.712026, 914.712026, 0.000000, X, Y) && !ellipse(28427.626200, 30926.936000, 1370.840039, 1370.840039, 0.000000, X, Y) && !ellipse(28436.403961, 30388.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23993.704000, 29591.700000, 1349.736039, 1349.736039, 352.475780, X, Y) && !ellipse(29080.999939, 29359.276215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25968.702000, 27960.121000, 1159.336033, 1159.336033, 0.000000, X, Y) && !ellipse(26436.524384, 26836.982452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25478.348000, 25519.467200, 1066.840031, 1066.840031, 0.000000, X, Y)
[Tue Aug 21 03:41:04 2012] Writing fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src98.gif
[Tue Aug 21 05:28:07 2012] Mean detx,y = (-326.66, -329.39) 
[Tue Aug 21 05:28:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 05:28:53 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 05:28:53 2012] Setting source spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Tue Aug 21 05:28:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Tue Aug 21 09:28:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 09:28:04 2012] rmf not generated due to insufficient counts
[Tue Aug 21 16:20:16 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:16 2012] Error reading totcts from fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Tue Aug 21 16:20:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:21 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src98.arf
[Tue Aug 21 16:20:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:21 2012] Updating source flux to 3.4e-14
[Tue Aug 21 16:35:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting