[Sun Aug 19 10:16:36 2012] Detection parameters:
  Position = (269.3, 345.5) = 17 12 8.26 -39 54 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 15.3
  Background counts = 105.9
  Rate = 0.009 +/- 0.002

[Sun Aug 19 10:16:38 2012] Off-axis axis estimate = 4.01'
[Sun Aug 19 10:21:54 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:21:54 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Aug 19 10:21:54 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Sun Aug 19 10:21:54 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 8.44"
[Sun Aug 19 19:19:01 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src86.ximg exists
[Sun Aug 19 19:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src86.csv
[Sun Aug 19 19:19:01 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src86_1.ximg exists
[Sun Aug 19 19:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src86.csv
[Sun Aug 19 19:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:19:04 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sun Aug 19 19:19:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sun Aug 19 19:19:04 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sun Aug 19 19:19:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sun Aug 19 19:19:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:41:15 2012] Source 86 is offset by 6.276429 and -6.484160 pixels which is larger than
2 X fitted extent = 0.998221 x 0.998221, not incorporating fit results
[Mon Aug 20 06:41:15 2012] Warning, spatial fit 86 centroid is now closest to src. 89
[Mon Aug 20 06:41:15 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:15 2012] Assessing source extent using major
[Mon Aug 20 06:41:15 2012] Source does appear to be extended
[Mon Aug 20 06:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:42:25 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:42:25 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Mon Aug 20 06:42:25 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Mon Aug 20 06:42:25 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 8.44"
[Mon Aug 20 16:13:09 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src70.ximg exists
[Mon Aug 20 16:13:10 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon Aug 20 16:13:10 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src70 appears to have run properly
[Mon Aug 20 16:13:13 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon Aug 20 16:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Aug 20 16:13:13 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon Aug 20 16:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Aug 20 16:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:40 2012] Spatial fit model total counts = 1316.060000, observed total counts = 1301.000000
[Tue Aug 21 03:39:40 2012] Offset between fit and detection position for source 86 = 8.563278 pixels
[Tue Aug 21 03:39:40 2012] 1323.199000 total counts/ 1159.300000 bgd. counts: snr = 4.813693
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 8.563278 pixels
  Position = (276.3, 340.7) = 17 12 5.58 -39 54 26.4
  Extent = 16.9" x 16.9", rotation angle = 352
  Source counts = 163.9 +/- 36.4
  Background counts = 1159.3
  Rate = 0.01 +/- 0.003
[Tue Aug 21 03:39:40 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:39:40 2012] Assessing source extent using major
[Tue Aug 21 03:39:40 2012] Source does appear to be extended
[Tue Aug 21 03:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 03:39:40 2012] Source is confused with source 89
[Tue Aug 21 03:41:04 2012] XMMSAS src. selection expression = ellipse(23993.704000, 29591.700000, 1012.302029, 1012.302029, 352.475780, X, Y)
[Tue Aug 21 03:41:04 2012] Writing source region out to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src86_src.reg
[Tue Aug 21 03:41:04 2012] Extracting stamp from image fullrun_pn_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (218, 283) - (335, 399)
[Tue Aug 21 03:41:04 2012] XMMSAS bgd. selection expression = annulus(23993.704000, 29591.700000, 1687.170049, 3374.340097, X, Y) && !ellipse(28842.384000, 28489.978000, 1560.976045, 1560.976045, 0.000000, X, Y) && !ellipse(22055.338000, 29904.982000, 1434.904041, 1434.904041, 0.000000, X, Y) && !ellipse(27731.010468, 29138.518494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.584351, 27094.560120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.730000, 26492.394000, 1111.264032, 1111.264032, 0.000000, X, Y) && !ellipse(27418.948944, 25434.707489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21170.548000, 30776.844000, 2868.608083, 2868.608083, 0.000000, X, Y) && !ellipse(20298.670135, 30225.261810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21631.646000, 30492.866000, 2717.216078, 2717.216078, 0.000000, X, Y) && !ellipse(26979.170000, 27548.590000, 1133.800033, 1133.800033, 0.000000, X, Y) && !ellipse(26844.753723, 25351.705963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.626200, 30926.936000, 1370.840039, 1370.840039, 0.000000, X, Y) && !ellipse(23182.159393, 29380.896118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23035.230072, 28975.823608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25968.702000, 27960.121000, 1159.336033, 1159.336033, 0.000000, X, Y) && !ellipse(26476.798523, 27794.986053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.524384, 26836.982452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20503.962000, 26019.240400, 1364.464039, 1364.464039, 0.000000, X, Y) && !ellipse(25478.348000, 25519.467200, 1066.840031, 1066.840031, 0.000000, X, Y)
[Tue Aug 21 03:41:04 2012] Writing fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src86.gif
[Tue Aug 21 05:08:49 2012] Mean detx,y = (-2942.24, -2365.10) 
[Tue Aug 21 05:08:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 05:09:33 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 05:09:33 2012] Setting source spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Tue Aug 21 05:09:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Tue Aug 21 16:20:15 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:15 2012] Error reading totcts from fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Tue Aug 21 16:20:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:20 2012] Using photon index=1.80, rate=0.0146, arf fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src86.arf
[Tue Aug 21 16:20:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:20 2012] Updating source flux to 9.3e-14
[Tue Aug 21 16:35:59 2012] Flag b found in src. 86 procflags, skipping spectral fitting
[Tue Aug 21 16:35:59 2012] Flag c found in src. 86 procflags, skipping spectral fitting