[Sun Aug 19 10:16:36 2012] Detection parameters:
  Position = (407.4, 422.9) = 17 11 16.10 -39 48 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.2 +/- 12.3
  Background counts = 30.8
  Rate = 0.005 +/- 0.001

[Sun Aug 19 10:16:38 2012] Off-axis axis estimate = 11.99'
[Sun Aug 19 10:21:54 2012] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:21:54 2012] Initial guess for spatial extent in simple fitting = 12.43"
[Sun Aug 19 10:21:54 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.932
[Sun Aug 19 10:21:54 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 12.43"
[Sun Aug 19 19:19:00 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src70.ximg exists
[Sun Aug 19 19:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src70.csv
[Sun Aug 19 19:19:00 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Aug 19 19:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src70.csv
[Sun Aug 19 19:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:19:04 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Aug 19 19:19:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sun Aug 19 19:19:04 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Aug 19 19:19:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sun Aug 19 19:19:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:41:15 2012] Spatial fit model total counts = 753.900000, observed total counts = 754.000000
[Mon Aug 20 06:41:15 2012] Offset between fit and detection position for source 70 = 1.746032 pixels
[Mon Aug 20 06:41:15 2012] Warning, changing simple spatial fit ID from 70 to 67
[Mon Aug 20 06:41:15 2012] 686.895900 total counts/ 669.555000 bgd. counts: snr = 0.670160
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 1.746032 pixels
  Position = (407.2, 424.7) = 17 11 16.18 -39 48 20.6
  Extent = 4.7 (3.2-8.2)", rotation angle = 0
  Source counts = 17.3 +/- 26.2
  Background counts = 669.6
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability