[Sun Aug 19 10:16:35 2012] Detection parameters:
  Position = (336.3, 308.0) = 17 11 42.90 -39 56 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.7 +/- 22.8
  Background counts = 65.2
  Rate = 0.02 +/- 0.002

[Sun Aug 19 10:16:38 2012] Off-axis axis estimate = 2.83'
[Sun Aug 19 10:21:54 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:21:54 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Sun Aug 19 10:21:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Sun Aug 19 10:21:54 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 7.84"
[Sun Aug 19 19:19:00 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src52.ximg exists
[Sun Aug 19 19:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src52.csv
[Sun Aug 19 19:19:00 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun Aug 19 19:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src52.csv
[Sun Aug 19 19:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:19:03 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun Aug 19 19:19:03 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun Aug 19 19:19:03 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Mon Aug 20 06:41:15 2012] Spatial fit model total counts = 2114.540000, observed total counts = 2111.000000
[Mon Aug 20 06:41:15 2012] Offset between fit and detection position for source 52 = 0.930203 pixels
[Mon Aug 20 06:41:15 2012] Warning, changing simple spatial fit ID from 52 to 25
[Mon Aug 20 06:41:15 2012] 2035.300000 total counts/ 1867.560000 bgd. counts: snr = 3.881498
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.930203 pixels
  Position = (337.2, 308.3) = 17 11 42.57 -39 56 47.4
  Extent = 15.3 (3.6-30.5)", rotation angle = 0
  Source counts = 167.7 +/- 45.1
  Background counts = 1867.6
  Rate = 0.01 +/- 0.004
[Mon Aug 20 06:41:15 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:15 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:15 2012] Source does appear to be extended
[Mon Aug 20 06:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:15 2012] Source is confused with source 25
[Mon Aug 20 06:42:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:42:25 2012] Initial guess for spatial extent in simple fitting = 15.25"
[Mon Aug 20 06:42:25 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.997
[Mon Aug 20 06:42:25 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 15.25"
[Mon Aug 20 16:13:08 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src45.ximg exists
[Mon Aug 20 16:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src45.csv
[Mon Aug 20 16:13:08 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src45_1.ximg exists
[Mon Aug 20 16:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src45.csv
[Mon Aug 20 16:13:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:13:12 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Mon Aug 20 16:13:12 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Aug 20 16:13:12 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Tue Aug 21 03:39:40 2012] Warning, spatial fit 45 centroid is now closest to src. 106
[Tue Aug 21 03:39:40 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:39:40 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:39:40 2012] Source does appear to be extended
[Tue Aug 21 03:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 03:41:03 2012] XMMSAS src. selection expression = ellipse(29287.830000, 26771.322000, 915.096026, 915.096026, 0.000000, X, Y)
[Tue Aug 21 03:41:03 2012] Writing source region out to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src52_src.reg
[Tue Aug 21 03:41:03 2012] Extracting stamp from image fullrun_pn_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (285, 256) - (390, 361)
[Tue Aug 21 03:41:03 2012] XMMSAS bgd. selection expression = annulus(29287.830000, 26771.322000, 1525.160044, 3050.320088, X, Y) && !ellipse(30065.452942, 30321.681854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28842.384000, 28489.978000, 1560.976045, 1560.976045, 0.000000, X, Y) && !ellipse(29549.012573, 30050.053772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.010468, 29138.518494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29205.582400, 28023.607800, 1287.752037, 1287.752037, 0.000000, X, Y) && !ellipse(27897.584351, 27094.560120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27213.730000, 26492.394000, 1111.264032, 1111.264032, 0.000000, X, Y) && !ellipse(28762.093750, 26306.350952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.948944, 25434.707489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28418.100189, 27523.047333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29264.007600, 27713.164000, 1266.704036, 294.272808, 296.424000, X, Y) && !ellipse(26979.170000, 27548.590000, 1133.800033, 1133.800033, 0.000000, X, Y) && !ellipse(26844.753723, 25351.705963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.839935, 24831.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.627200, 25048.671400, 914.712026, 914.712026, 0.000000, X, Y) && !ellipse(25380.104156, 23788.899963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.626200, 30926.936000, 1370.840039, 1370.840039, 0.000000, X, Y) && !ellipse(28436.403961, 30388.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29080.999939, 29359.276215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25968.702000, 27960.121000, 1159.336033, 1159.336033, 0.000000, X, Y) && !ellipse(26476.798523, 27794.986053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.524384, 26836.982452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29586.605133, 25806.541687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25478.348000, 25519.467200, 1066.840031, 1066.840031, 0.000000, X, Y) && !ellipse(28355.133514, 24573.299164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25931.528000, 24386.242000, 1102.968032, 1102.968032, 0.000000, X, Y) && !ellipse(28356.574000, 24131.722000, 1201.432035, 1201.432035, 0.000000, X, Y) && !ellipse(27117.674805, 23270.720551, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 03:41:03 2012] Writing fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src52.gif
[Tue Aug 21 04:49:54 2012] Mean detx,y = (2253.69, 909.36) 
[Tue Aug 21 04:49:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 04:50:31 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 04:50:31 2012] Setting source spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Tue Aug 21 04:50:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Tue Aug 21 16:20:14 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:14 2012] Error reading totcts from fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Tue Aug 21 16:20:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:19 2012] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src52.arf
[Tue Aug 21 16:20:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:19 2012] Updating source flux to 3.6e-14
[Tue Aug 21 16:35:59 2012] Flag c found in src. 52 procflags, skipping spectral fitting