[Sun Aug 19 10:16:34 2012] Detection parameters:
  Position = (298.1, 452.1) = 17 11 57.36 -39 46 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.3 +/- 16.6
  Background counts = 55.9
  Rate = 0.009 +/- 0.001

[Sun Aug 19 10:16:38 2012] Off-axis axis estimate = 11.14'
[Sun Aug 19 10:21:54 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:21:54 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Sun Aug 19 10:21:54 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.848
[Sun Aug 19 10:21:54 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 12.00"
[Sun Aug 19 19:18:59 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src34.ximg exists
[Sun Aug 19 19:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src34.csv
[Sun Aug 19 19:18:59 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Aug 19 19:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src34.csv
[Sun Aug 19 19:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:19:03 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Aug 19 19:19:03 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Aug 19 19:19:03 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Mon Aug 20 06:41:15 2012] Spatial fit model total counts = 1065.830000, observed total counts = 980.000000
[Mon Aug 20 06:41:15 2012] Offset between fit and detection position for source 34 = 2.669764 pixels
[Mon Aug 20 06:41:15 2012] 1028.617000 total counts/ 676.109000 bgd. counts: snr = 13.556907
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.669764 pixels
  Position = (299.1, 454.5) = 17 11 56.99 -39 46 11.1
  Extent = 20.7 (14.1-24.0)", rotation angle = 0
  Source counts = 352.5 +/- 32.1
  Background counts = 676.1
  Rate = 0.03 +/- 0.003
[Mon Aug 20 06:41:15 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:15 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:15 2012] Source does appear to be extended
[Mon Aug 20 06:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:15 2012] Source is confused with source 8
[Mon Aug 20 06:42:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 06:42:25 2012] Initial guess for spatial extent in simple fitting = 20.71"
[Mon Aug 20 06:42:25 2012] source mask rpix=4.8, npix_max = 110, mask sum = 110, frac = 0.994
[Mon Aug 20 06:42:25 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 20.71"
[Mon Aug 20 16:13:08 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src29.ximg exists
[Mon Aug 20 16:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src29.csv
[Mon Aug 20 16:13:08 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Aug 20 16:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src29.csv
[Mon Aug 20 16:13:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:13:12 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Aug 20 16:13:12 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Aug 20 16:13:12 2012] Fit fullrun_pn_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Aug 21 03:39:40 2012] Warning, spatial fit 29 centroid is now closest to src. 66
[Tue Aug 21 03:39:40 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:39:40 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:39:40 2012] Source does appear to be extended
[Tue Aug 21 03:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 03:41:02 2012] XMMSAS src. selection expression = ellipse(25971.558000, 39497.204400, 1242.348036, 1242.348036, 0.000000, X, Y)
[Tue Aug 21 03:41:02 2012] Writing source region out to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src34_src.reg
[Tue Aug 21 03:41:02 2012] Extracting stamp from image fullrun_pn_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (228, 383) - (370, 526)
[Tue Aug 21 03:41:02 2012] XMMSAS bgd. selection expression = annulus(25971.558000, 39497.204400, 2070.580060, 4141.160119, X, Y) && !ellipse(27138.689362, 40754.874359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.744171, 40240.263306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.327896, 36928.762085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.062073, 39275.380524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.047241, 38778.603302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24266.656555, 37458.204132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20892.426840, 35986.372000, 1145.720033, 1145.720033, 0.000000, X, Y) && !ellipse(26928.403076, 39187.347717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.315582, 38233.642609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25227.766000, 38739.274000, 3312.928095, 3312.928095, 0.000000, X, Y) && !ellipse(25257.672791, 37282.085419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22126.632584, 36247.638214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20895.768000, 35635.614000, 1783.400051, 1783.400051, 0.000000, X, Y)
[Tue Aug 21 03:41:02 2012] Writing fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src34.gif
[Tue Aug 21 04:19:37 2012] Mean detx,y = (103.16, -12025.73) 
[Tue Aug 21 04:19:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 04:20:39 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 04:20:39 2012] Setting source spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Aug 21 04:20:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Aug 21 16:20:13 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:13 2012] Error reading totcts from fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Aug 21 16:20:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:18 2012] Using photon index=1.80, rate=0.0313, arf fullrun_pn_xmm0093670301_pi300-10000_pass1_cl_src34.arf
[Tue Aug 21 16:20:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:18 2012] Updating source flux to 1.7e-13
[Tue Aug 21 16:35:59 2012] Flag c found in src. 34 procflags, skipping spectral fitting