[Sun Aug 19 10:16:33 2012] Detection parameters:
  Position = (322.0, 325.2) = 17 11 48.31 -39 55 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 704.0 +/- 35.1
  Background counts = 86.8
  Rate = 0.08 +/- 0.004

[Sun Aug 19 10:16:38 2012] Off-axis axis estimate = 2.58'
[Sun Aug 19 10:21:54 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:21:54 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Aug 19 10:21:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Sun Aug 19 10:21:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.72"
[Sun Aug 19 19:18:58 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 19:18:58 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 19:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 19:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:19:01 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 19:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 19 19:19:01 2012] fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 19:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 19 19:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:41:14 2012] Spatial fit model total counts = 3296.720000, observed total counts = 2615.000000
[Mon Aug 20 06:41:15 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 06:41:15 2012] Spatial fit model total counts = 2522.170000, observed total counts = 2521.000000
[Mon Aug 20 06:41:15 2012] Offset between fit and detection position for source 1 = 5.538870 pixels
[Mon Aug 20 06:41:15 2012] Warning, changing simple spatial fit ID from 1 to 48
[Mon Aug 20 06:41:15 2012] 2259.951000 total counts/ 2209.400000 bgd. counts: snr = 1.075456
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.538870 pixels
  Position = (327.6, 325.0) = 17 11 46.22 -39 55 34.6
  Extent = 15.3 (8.9-30.7)", rotation angle = 351 (342-356) degrees
  Source counts = 50.6 +/- 47.5
  Background counts = 2209.4
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability