[Sun Aug 19 10:18:35 2012] Detection parameters:
  Position = (282.0, 267.8) = 17 12 3.46 -39 59 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.3 +/- 17.6
  Background counts = 65.8
  Rate = 0.007 +/- 0.001

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 2.52'
[Mon Aug 20 01:20:53 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:53 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Aug 20 01:20:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Mon Aug 20 01:20:53 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.69"
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src19.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src19.csv
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src19.csv
[Mon Aug 20 06:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Aug 20 06:40:40 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Aug 20 06:41:57 2012] Spatial fit model total counts = 930.256000, observed total counts = 928.000000
[Mon Aug 20 06:41:57 2012] Offset between fit and detection position for source 75 = 0.639695 pixels
[Mon Aug 20 06:41:57 2012] 942.035000 total counts/ 803.870000 bgd. counts: snr = 4.873098
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.639695 pixels
  Position = (282.6, 267.7) = 17 12 3.22 -39 59 43.7
  Extent = 11.1 (8.0-15.4)", rotation angle = 0
  Source counts = 138.2 +/- 30.7
  Background counts = 803.9
  Rate = 0.009 +/- 0.002
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 22:10:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Mon Aug 20 22:10:43 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.06"
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src12.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src12.csv
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src12.csv
[Tue Aug 21 03:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Aug 21 03:39:01 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Aug 21 03:40:25 2012] Warning, spatial fit 12 centroid is now closest to src. 74
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:25 2012] XMMSAS src. selection expression = ellipse(24538.410800, 23245.613200, 663.522019, 663.522019, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src75_src.reg
[Tue Aug 21 13:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (244, 230) - (321, 306)
[Tue Aug 21 13:19:25 2012] XMMSAS bgd. selection expression = annulus(24538.410800, 23245.613200, 1105.870032, 2211.740064, X, Y) && !ellipse(27237.144800, 26537.980200, 1104.424032, 1104.424032, 0.000000, X, Y) && !ellipse(25131.392000, 21460.971200, 279.646408, 279.646408, 0.000000, X, Y) && !ellipse(27268.809692, 25546.027557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29216.313000, 26382.974000, 2510.064072, 2510.064072, 0.000000, X, Y) && !ellipse(27478.998000, 24854.996000, 798.427223, 798.427223, 0.000000, X, Y) && !ellipse(26835.798309, 24475.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.008057, 23869.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.198151, 25173.017181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.265289, 24321.570526, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src75.gif
[Tue Aug 21 13:24:29 2012] Mean detx,y = (2752.00, -4169.99) 
[Tue Aug 21 13:24:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:24:45 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:24:46 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Aug 21 13:24:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Tue Aug 21 16:20:30 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:30 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Aug 21 16:20:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:34 2012] Using photon index=1.80, rate=0.00885, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src75.arf
[Tue Aug 21 16:20:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:34 2012] Updating source flux to 9.5e-14