[Sun Aug 19 10:18:35 2012] Detection parameters:
  Position = (314.6, 280.1) = 17 11 51.10 -39 58 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.1 +/- 13.8
  Background counts = 46.9
  Rate = 0.004 +/- 0.001

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 1.77'
[Mon Aug 20 01:20:56 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:56 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon Aug 20 01:20:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Mon Aug 20 01:20:56 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.31"
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src55.ximg exists
[Mon Aug 20 06:40:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src55.csv
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Aug 20 06:40:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src55.csv
[Mon Aug 20 06:40:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:41 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Aug 20 06:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Aug 20 06:40:41 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Aug 20 06:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Aug 20 06:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:41:57 2012] Source 71 is offset by -0.325686 and 1.314949 pixels which is larger than
2 X fitted extent = 4.538055 x 0.820782, not incorporating fit results
[Mon Aug 20 06:41:57 2012] Warning, spatial fit 55 centroid is now closest to src. 74
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:58 2012] Source is confused with source 69
[Mon Aug 20 22:10:43 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon Aug 20 22:10:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 7.31"
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src46.ximg exists
[Tue Aug 21 03:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src46.csv
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue Aug 21 03:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src46.csv
[Tue Aug 21 03:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:02 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue Aug 21 03:39:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue Aug 21 03:39:02 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue Aug 21 03:39:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue Aug 21 03:39:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:40:25 2012] Warning, spatial fit 46 centroid is now closest to src. 69
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:26 2012] XMMSAS src. selection expression = ellipse(27324.265289, 24321.570526, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 13:19:26 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src71_src.reg
[Tue Aug 21 13:19:26 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (277, 243) - (352, 318)
[Tue Aug 21 13:19:26 2012] XMMSAS bgd. selection expression = annulus(27324.265289, 24321.570526, 1087.500000, 2175.000000, X, Y) && !ellipse(27237.144800, 26537.980200, 1104.424032, 1104.424032, 0.000000, X, Y) && !ellipse(28075.577515, 27099.047119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.407043, 25192.791840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.410800, 23245.613200, 884.696025, 884.696025, 0.000000, X, Y) && !ellipse(27268.809692, 25546.027557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29216.313000, 26382.974000, 2510.064072, 2510.064072, 0.000000, X, Y) && !ellipse(28263.691650, 25966.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.397125, 27020.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.998000, 24854.996000, 798.427223, 798.427223, 0.000000, X, Y) && !ellipse(27312.992035, 27349.334076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26835.798309, 24475.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.734467, 26912.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.008057, 23869.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.198151, 25173.017181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.594000, 24092.400000, 1240.192036, 1240.192036, 0.000000, X, Y) && !ellipse(29401.012000, 25634.232000, 1255.032036, 1255.032036, 0.000000, X, Y) && !ellipse(29215.232910, 25108.815918, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:19:26 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src71.gif
[Tue Aug 21 13:44:00 2012] Mean detx,y = (-54.65, -3250.40) 
[Tue Aug 21 13:44:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:44:15 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:44:16 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Aug 21 13:44:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue Aug 21 15:47:52 2012] Not generating rmf since there are only 55 counts
[Tue Aug 21 15:47:52 2012] rmf not generated due to insufficient counts
[Tue Aug 21 16:20:32 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:32 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Aug 21 16:20:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:36 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src71.arf
[Tue Aug 21 16:20:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:36 2012] Updating source flux to 3.9e-14
[Tue Aug 21 16:29:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting