[Sun Aug 19 10:18:35 2012] Detection parameters:
  Position = (331.6, 283.1) = 17 11 44.70 -39 58 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.6 +/- 13.6
  Background counts = 33.0
  Rate = 0.005 +/- 0.0009

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 2.65'
[Mon Aug 20 01:20:56 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:56 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Aug 20 01:20:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Mon Aug 20 01:20:56 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.75"
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src45.ximg exists
[Mon Aug 20 06:40:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src45.csv
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Aug 20 06:40:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src45.csv
[Mon Aug 20 06:40:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:41 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Aug 20 06:40:41 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Aug 20 06:40:41 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Mon Aug 20 06:41:57 2012] Source 68 is offset by -0.344334 and -1.291428 pixels which is larger than
2 X fitted extent = 0.919572 x 0.919572, not incorporating fit results
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 22:10:43 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Aug 20 22:10:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 7.75"
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src37.ximg exists
[Tue Aug 21 03:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src37.csv
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Aug 21 03:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src37.csv
[Tue Aug 21 03:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:02 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Aug 21 03:39:02 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Aug 21 03:39:02 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Aug 21 03:40:25 2012] Spatial fit model total counts = 678.000000, observed total counts = 676.000000
[Tue Aug 21 03:40:25 2012] Offset between fit and detection position for source 68 = 7.632722 pixels
[Tue Aug 21 03:40:25 2012] 665.052900 total counts/ 586.005000 bgd. counts: snr = 3.265425
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 7.632722 pixels
  Position = (326.4, 277.5) = 17 11 46.65 -39 59 1.3
  Extent = 15.5 (15.5-31.0)", rotation angle = 0
  Source counts = 79.0 +/- 25.8
  Background counts = 586.0
  Rate = 0.005 +/- 0.002
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:26 2012] XMMSAS src. selection expression = ellipse(28348.594000, 24092.400000, 930.144027, 930.144027, 0.000000, X, Y)
[Tue Aug 21 13:19:26 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src68_src.reg
[Tue Aug 21 13:19:26 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (273, 224) - (380, 331)
[Tue Aug 21 13:19:26 2012] XMMSAS bgd. selection expression = annulus(28348.594000, 24092.400000, 1550.240045, 3100.480089, X, Y) && !ellipse(27237.144800, 26537.980200, 1104.424032, 1104.424032, 0.000000, X, Y) && !ellipse(27105.976746, 27793.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28075.577515, 27099.047119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.407043, 25192.791840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.392000, 21460.971200, 279.646408, 279.646408, 0.000000, X, Y) && !ellipse(24538.410800, 23245.613200, 884.696025, 884.696025, 0.000000, X, Y) && !ellipse(27268.809692, 25546.027557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29216.313000, 26382.974000, 2510.064072, 2510.064072, 0.000000, X, Y) && !ellipse(28263.691650, 25966.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.397125, 27020.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.998000, 24854.996000, 798.427223, 798.427223, 0.000000, X, Y) && !ellipse(27312.992035, 27349.334076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26835.798309, 24475.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.734467, 26912.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.008057, 23869.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.674561, 27969.052429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.198151, 25173.017181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29401.012000, 25634.232000, 1255.032036, 1255.032036, 0.000000, X, Y) && !ellipse(27324.265289, 24321.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29215.232910, 25108.815918, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:19:26 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src68.gif
[Tue Aug 21 13:37:15 2012] Mean detx,y = (-1050.63, -3564.45) 
[Tue Aug 21 13:37:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:37:44 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:37:44 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Aug 21 13:37:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Aug 21 15:19:10 2012] Not generating rmf since there are only 79 counts
[Tue Aug 21 15:19:10 2012] rmf not generated due to insufficient counts
[Tue Aug 21 16:20:32 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:32 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Aug 21 16:20:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:36 2012] Using photon index=1.80, rate=0.00506, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src68.arf
[Tue Aug 21 16:20:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:36 2012] Updating source flux to 4.9e-14
[Tue Aug 21 16:29:28 2012] Flag b found in src. 68 procflags, skipping spectral fitting
[Tue Aug 21 16:29:28 2012] Source 68 has fewer than 100.000000 counts, skipping spectral fitting