[Sun Aug 19 10:18:34 2012] Detection parameters:
  Position = (314.0, 294.2) = 17 11 51.34 -39 57 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.4 +/- 17.5
  Background counts = 56.1
  Rate = 0.007 +/- 0.001

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 1.17'
[Mon Aug 20 01:20:53 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:54 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon Aug 20 01:20:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Mon Aug 20 01:20:54 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.01"
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src20.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src20.csv
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src20.csv
[Mon Aug 20 06:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Aug 20 06:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Aug 20 06:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Aug 20 06:40:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:41:57 2012] Warning, spatial fit 20 centroid is now closest to src. 64
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:58 2012] Source is confused with source 64
[Mon Aug 20 22:10:43 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon Aug 20 22:10:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.01"
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src13.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src13.csv
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src13.csv
[Tue Aug 21 03:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Aug 21 03:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Aug 21 03:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Aug 21 03:39:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:40:25 2012] Warning, spatial fit 13 centroid is now closest to src. 66
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:25 2012] XMMSAS src. selection expression = ellipse(27268.809692, 25546.027557, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src62_src.reg
[Tue Aug 21 13:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (276, 257) - (351, 332)
[Tue Aug 21 13:19:25 2012] XMMSAS bgd. selection expression = annulus(27268.809692, 25546.027557, 1087.500000, 2175.000000, X, Y) && !ellipse(28511.684000, 29007.426000, 1345.560039, 1345.560039, 0.000000, X, Y) && !ellipse(27237.144800, 26537.980200, 1104.424032, 1104.424032, 0.000000, X, Y) && !ellipse(27105.976746, 27793.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28075.577515, 27099.047119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.407043, 25192.791840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.410800, 23245.613200, 884.696025, 884.696025, 0.000000, X, Y) && !ellipse(27368.394531, 28470.985718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29216.313000, 26382.974000, 2510.064072, 2510.064072, 0.000000, X, Y) && !ellipse(28263.691650, 25966.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.397125, 27020.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.998000, 24854.996000, 798.427223, 798.427223, 0.000000, X, Y) && !ellipse(27312.992035, 27349.334076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26835.798309, 24475.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.734467, 26912.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.008057, 23869.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.674561, 27969.052429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29207.166931, 28476.614380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.198151, 25173.017181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.594000, 24092.400000, 1240.192036, 1240.192036, 0.000000, X, Y) && !ellipse(29401.012000, 25634.232000, 1255.032036, 1255.032036, 0.000000, X, Y) && !ellipse(27324.265289, 24321.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29215.232910, 25108.815918, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src62.gif
[Tue Aug 21 13:25:17 2012] Mean detx,y = (-108.19, -2070.84) 
[Tue Aug 21 13:25:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:25:29 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:25:30 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Aug 21 13:25:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Tue Aug 21 14:29:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 14:29:25 2012] rmf not generated due to insufficient counts
[Tue Aug 21 16:20:30 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:30 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Aug 21 16:20:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:34 2012] Using photon index=1.80, rate=0.00711, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src62.arf
[Tue Aug 21 16:20:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:34 2012] Updating source flux to 7.7e-14
[Tue Aug 21 16:29:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting