[Sun Aug 19 10:18:34 2012] Detection parameters:
  Position = (313.1, 303.0) = 17 11 51.67 -39 57 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.8 +/- 21.2
  Background counts = 58.7
  Rate = 0.01 +/- 0.001

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 1.12'
[Mon Aug 20 01:20:52 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:52 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Mon Aug 20 01:20:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Mon Aug 20 01:20:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.99"
[Mon Aug 20 06:40:37 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 20 06:40:37 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 20 06:40:37 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 20 06:40:39 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 20 06:41:57 2012] Spatial fit model total counts = 1312.510000, observed total counts = 1233.000000
[Mon Aug 20 06:41:57 2012] Offset between fit and detection position for source 60 = 2.652316 pixels
[Mon Aug 20 06:41:57 2012] 1240.786000 total counts/ 991.562000 bgd. counts: snr = 7.914617
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 2.652316 pixels
  Position = (313.6, 305.6) = 17 11 51.48 -39 56 59.1
  Extent = 13.8 (13.5-14.0)", rotation angle = 0
  Source counts = 249.2 +/- 35.2
  Background counts = 991.6
  Rate = 0.02 +/- 0.002
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:58 2012] Source is confused with source 49
[Mon Aug 20 22:10:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Mon Aug 20 22:10:43 2012] source mask rpix=3.2, npix_max = 53, mask sum = 48, frac = 0.889
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.81"
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 03:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 21 03:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 21 03:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Aug 21 03:39:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:40:25 2012] Warning, spatial fit 3 centroid is now closest to src. 58
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:25 2012] XMMSAS src. selection expression = ellipse(27237.144800, 26537.980200, 828.318024, 828.318024, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src60_src.reg
[Tue Aug 21 13:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (266, 258) - (361, 353)
[Tue Aug 21 13:19:25 2012] XMMSAS bgd. selection expression = annulus(27237.144800, 26537.980200, 1380.530040, 2761.060079, X, Y) && !ellipse(28511.684000, 29007.426000, 1345.560039, 1345.560039, 0.000000, X, Y) && !ellipse(27105.976746, 27793.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28075.577515, 27099.047119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.407043, 25192.791840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24538.410800, 23245.613200, 884.696025, 884.696025, 0.000000, X, Y) && !ellipse(27368.394531, 28470.985718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.809692, 25546.027557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29216.313000, 26382.974000, 2510.064072, 2510.064072, 0.000000, X, Y) && !ellipse(28263.691650, 25966.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29004.115601, 29530.568085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.397125, 27020.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.998000, 24854.996000, 798.427223, 798.427223, 0.000000, X, Y) && !ellipse(27312.992035, 27349.334076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26835.798309, 24475.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.734467, 26912.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.008057, 23869.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.674561, 27969.052429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29207.166931, 28476.614380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.198151, 25173.017181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.594000, 24092.400000, 1240.192036, 1240.192036, 0.000000, X, Y) && !ellipse(29401.012000, 25634.232000, 1255.032036, 1255.032036, 0.000000, X, Y) && !ellipse(28105.653687, 30135.020020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.265289, 24321.570526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29215.232910, 25108.815918, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src60.gif
[Tue Aug 21 13:20:23 2012] Mean detx,y = (-175.52, -1109.97) 
[Tue Aug 21 13:20:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:20:37 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:20:37 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Aug 21 13:20:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Tue Aug 21 16:20:29 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:30 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Aug 21 16:20:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:34 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src60.arf
[Tue Aug 21 16:20:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:34 2012] Updating source flux to 1.7e-13
[Tue Aug 21 16:29:28 2012] Flag c found in src. 60 procflags, skipping spectral fitting