[Sun Aug 19 10:18:34 2012] Detection parameters:
  Position = (321.6, 304.1) = 17 11 48.45 -39 57 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.4 +/- 18.5
  Background counts = 48.2
  Rate = 0.01 +/- 0.001

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 1.73'
[Mon Aug 20 01:20:52 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:52 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Aug 20 01:20:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.686
[Mon Aug 20 01:20:52 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.29"
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src6.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src6.csv
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src6.csv
[Mon Aug 20 06:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Aug 20 06:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Aug 20 06:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Aug 20 06:40:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:41:57 2012] Warning, spatial fit 6 centroid is now closest to src. 49
[Mon Aug 20 06:41:57 2012] Source 56 is offset by 3.446587 and -2.668205 pixels which is larger than
2 X fitted extent = 0.851402 x 0.851402, not incorporating fit results
[Mon Aug 20 06:41:57 2012] Spatial fit model total counts = 1257.760000, observed total counts = 1265.000000
[Mon Aug 20 06:41:57 2012] Offset between fit and detection position for source 56 = 2.221378 pixels
[Mon Aug 20 06:41:57 2012] Warning, changing simple spatial fit ID from 6 to 24
[Mon Aug 20 06:41:57 2012] 1193.243000 total counts/ 1175.580000 bgd. counts: snr = 0.515156
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 2.221378 pixels
  Position = (323.7, 305.0) = 17 11 47.68 -39 57 1.6
  Extent = 7.9 (7.4-28.5)", rotation angle = 0
  Source counts = 17.7 +/- 34.5
  Background counts = 1175.6
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability