[Sun Aug 19 10:18:34 2012] Detection parameters: Position = (314.5, 308.9) = 17 11 51.15 -39 56 42.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 182.5 +/- 19.6 Background counts = 59.8 Rate = 0.01 +/- 0.001 [Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 1.39' [Mon Aug 20 01:20:52 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting [Mon Aug 20 01:20:52 2012] Initial guess for spatial extent in simple fitting = 7.12" [Mon Aug 20 01:20:52 2012] source mask rpix=1.6, npix_max = 18, mask sum = 17, frac = 0.930 [Mon Aug 20 01:20:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.12" [Mon Aug 20 06:40:37 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src4.ximg exists [Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src4_1.ximg exists [Mon Aug 20 06:40:38 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src4 appears to have run properly [Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Mon Aug 20 06:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src4.csv [Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Mon Aug 20 06:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src4.csv [Mon Aug 20 06:40:39 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 20 06:41:57 2012] Spatial fit model total counts = 1208.950000, observed total counts = 1231.000000 [Mon Aug 20 06:41:57 2012] Offset between fit and detection position for source 55 = 5.598617 pixels Spatial fit parameters: Offset between fit and detection position for source 55 = 5.598617 pixels Position = (310.0, 305.6) = 17 11 52.87 -39 56 59.1 Extent = 14.2 (14.2-28.5)" x 14.2 (14.2-28.5)", rotation angle = 347 (322-0) degrees Source counts = 1450.2 +/- 38.1 Background counts = 0.0 Rate = 0.09 +/- 0.002 Deleting source due to low signal-to-noise ratio