[Sun Aug 19 10:18:34 2012] Detection parameters:
  Position = (253.0, 342.1) = 17 12 14.41 -39 54 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.1 +/- 19.9
  Background counts = 69.9
  Rate = 0.01 +/- 0.002

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 4.57'
[Mon Aug 20 01:20:52 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:52 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Mon Aug 20 01:20:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.197
[Mon Aug 20 01:20:52 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.71"
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src5.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src5.csv
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src5.csv
[Mon Aug 20 06:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Aug 20 06:40:40 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Aug 20 06:41:57 2012] Spatial fit model total counts = 1263.810000, observed total counts = 1264.000000
[Mon Aug 20 06:41:57 2012] Offset between fit and detection position for source 40 = 1.240864 pixels
[Mon Aug 20 06:41:57 2012] 1218.621000 total counts/ 1019.760000 bgd. counts: snr = 6.227312
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.240864 pixels
  Position = (253.3, 343.3) = 17 12 14.28 -39 54 14.9
  Extent = 12.0 (9.2-17.4)", rotation angle = 0
  Source counts = 198.9 +/- 34.9
  Background counts = 1019.8
  Rate = 0.01 +/- 0.002
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:58 2012] Source is confused with source 38
[Mon Aug 20 22:10:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Mon Aug 20 22:10:43 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.153
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.00"
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src4.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src4.csv
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Aug 21 03:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src4.csv
[Tue Aug 21 03:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Aug 21 03:39:01 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Aug 21 03:40:25 2012] Warning, spatial fit 4 centroid is now closest to src. 38
[Tue Aug 21 03:40:25 2012] Spatial fit model total counts = 943.844000, observed total counts = 903.000000
[Tue Aug 21 03:40:25 2012] Offset between fit and detection position for source 40 = 0.885274 pixels
[Tue Aug 21 03:40:25 2012] Warning, changing simple spatial fit ID from 4 to 30
[Tue Aug 21 03:40:25 2012] 969.343600 total counts/ 954.371000 bgd. counts: snr = 0.484662
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.885274 pixels
  Position = (252.5, 343.5) = 17 12 14.61 -39 54 13.9
  Extent = 5.6 (2.8-20.6)", rotation angle = 0
  Source counts = 15.0 +/- 31.1
  Background counts = 954.4
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability