[Sun Aug 19 10:18:33 2012] Detection parameters:
  Position = (257.1, 421.1) = 17 12 12.84 -39 48 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.1 +/- 11.3
  Background counts = 26.1
  Rate = 0.007 +/- 0.001

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 9.39'
[Mon Aug 20 01:20:54 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:54 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Mon Aug 20 01:20:54 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Mon Aug 20 01:20:54 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.12"
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src25.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src25.csv
[Mon Aug 20 06:40:38 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Aug 20 06:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src25.csv
[Mon Aug 20 06:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Aug 20 06:40:40 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Aug 20 06:40:40 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Aug 20 06:41:57 2012] Warning, spatial fit 25 centroid is now closest to src. 22
[Mon Aug 20 06:41:58 2012] Spatial fit model total counts = 395.788000, observed total counts = 393.000000
[Mon Aug 20 06:41:58 2012] Offset between fit and detection position for source 30 = 1.686402 pixels
[Mon Aug 20 06:41:58 2012] Warning, changing simple spatial fit ID from 25 to 71
[Mon Aug 20 06:41:58 2012] 393.003900 total counts/ 331.216000 bgd. counts: snr = 3.395063
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.686402 pixels
  Position = (258.8, 421.2) = 17 12 12.21 -39 48 36.2
  Extent = 11.4 (4.9-22.6)", rotation angle = 0
  Source counts = 61.8 +/- 19.8
  Background counts = 331.2
  Rate = 0.004 +/- 0.001
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:58 2012] Source is confused with source 27
[Mon Aug 20 22:10:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Mon Aug 20 22:10:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.38"
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src18.ximg exists
[Tue Aug 21 03:38:59 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Aug 21 03:38:59 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src18 appears to have run properly
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Aug 21 03:39:01 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Aug 21 03:39:01 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Aug 21 03:40:25 2012] Source 30 is offset by 1.739690 and 0.619315 pixels which is larger than
2 X fitted extent = 1.444349 x 1.444349, not incorporating fit results
[Tue Aug 21 03:40:25 2012] Source 30 is offset by -4.001655 and 3.367954 pixels which is larger than
2 X fitted extent = 1.626598 x 1.626598, not incorporating fit results
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:25 2012] XMMSAS src. selection expression = ellipse(22463.610000, 36593.450000, 682.710020, 682.710020, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src30_src.reg
[Tue Aug 21 13:19:25 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (220, 382) - (298, 460)
[Tue Aug 21 13:19:25 2012] XMMSAS bgd. selection expression = annulus(22463.610000, 36593.450000, 1137.850033, 2275.700065, X, Y) && !ellipse(23449.600780, 36635.579800, 629.746418, 629.746418, 0.000000, X, Y) && !ellipse(23957.742400, 39337.445600, 2452.552071, 943.616027, 290.136000, X, Y) && !ellipse(23699.078000, 37472.326600, 1081.336031, 1081.336031, 0.000000, X, Y) && !ellipse(25562.176000, 39468.040000, 952.824027, 952.824027, 0.000000, X, Y) && !ellipse(25378.892000, 38337.785400, 1845.320053, 1845.320053, 0.000000, X, Y) && !ellipse(23010.716187, 38055.415802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25161.502000, 39143.858000, 1931.552056, 1931.552056, 0.000000, X, Y) && !ellipse(24396.474213, 37461.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.763062, 37081.582916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.550000, 38895.382000, 3863.104111, 3863.104111, 0.000000, X, Y)
[Tue Aug 21 13:19:25 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src30.gif
[Tue Aug 21 13:28:19 2012] Mean detx,y = (3841.84, 9254.11) 
[Tue Aug 21 13:28:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:28:39 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:28:39 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Aug 21 13:28:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Aug 21 15:02:18 2012] Not generating rmf since there are only 61 counts
[Tue Aug 21 15:02:18 2012] rmf not generated due to insufficient counts
[Tue Aug 21 16:20:31 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:31 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Aug 21 16:20:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:34 2012] Using photon index=1.80, rate=0.00396, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src30.arf
[Tue Aug 21 16:20:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:34 2012] Updating source flux to 8.2e-14
[Tue Aug 21 16:29:28 2012] Flag b found in src. 30 procflags, skipping spectral fitting
[Tue Aug 21 16:29:28 2012] Flag c found in src. 30 procflags, skipping spectral fitting
[Tue Aug 21 16:29:28 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting