[Sun Aug 19 10:18:32 2012] Detection parameters:
  Position = (286.0, 451.8) = 17 12 1.91 -39 46 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.9 +/- 11.7
  Background counts = 24.4
  Rate = 0.003 +/- 0.0007

[Sun Aug 19 10:18:35 2012] Off-axis axis estimate = 11.16'
[Mon Aug 20 01:20:56 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:20:56 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Mon Aug 20 01:20:56 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Mon Aug 20 01:20:56 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 12.01"
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src67.ximg exists
[Mon Aug 20 06:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src67.csv
[Mon Aug 20 06:40:39 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon Aug 20 06:40:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src67.csv
[Mon Aug 20 06:40:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 06:40:41 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon Aug 20 06:40:41 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Aug 20 06:40:41 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Mon Aug 20 06:41:57 2012] Spatial fit model total counts = 549.622000, observed total counts = 529.000000
[Mon Aug 20 06:41:57 2012] Offset between fit and detection position for source 15 = 3.977758 pixels
[Mon Aug 20 06:41:57 2012] Warning, changing simple spatial fit ID from 67 to 56
[Mon Aug 20 06:41:57 2012] 552.134000 total counts/ 284.232000 bgd. counts: snr = 15.890570
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.977758 pixels
  Position = (289.8, 450.5) = 17 12 0.50 -39 46 28.8
  Extent = 24.1 (24.1-48.3)", rotation angle = 0
  Source counts = 267.9 +/- 23.5
  Background counts = 284.2
  Rate = 0.02 +/- 0.002
[Mon Aug 20 06:41:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:58 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:58 2012] Source does appear to be extended
[Mon Aug 20 06:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:58 2012] Source is confused with source 18
[Mon Aug 20 22:10:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:10:43 2012] Initial guess for spatial extent in simple fitting = 24.14"
[Mon Aug 20 22:10:43 2012] source mask rpix=5.6, npix_max = 146, mask sum = 156, frac = 1.065
[Mon Aug 20 22:10:43 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 24.14"
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src57.ximg exists
[Tue Aug 21 03:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src57.csv
[Tue Aug 21 03:39:00 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src57_1.ximg exists
[Tue Aug 21 03:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src57.csv
[Tue Aug 21 03:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 03:39:03 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Tue Aug 21 03:39:03 2012] fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Tue Aug 21 03:39:03 2012] Fit fullrun_mos2_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Tue Aug 21 03:40:26 2012] Warning, spatial fit 57 centroid is now closest to src. 17
[Tue Aug 21 03:40:26 2012] Source 15 is offset by 2.855678 and 1.893155 pixels which is larger than
2 X fitted extent = 1.400993 x 1.400993, not incorporating fit results
[Tue Aug 21 03:40:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:26 2012] Source does appear to be extended
[Tue Aug 21 03:40:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 13:19:27 2012] XMMSAS src. selection expression = ellipse(25161.502000, 39143.858000, 1448.664042, 1448.664042, 0.000000, X, Y)
[Tue Aug 21 13:19:27 2012] Writing source region out to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src15_src.reg
[Tue Aug 21 13:19:27 2012] Extracting stamp from image fullrun_mos2_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (207, 367) - (373, 534)
[Tue Aug 21 13:19:27 2012] XMMSAS bgd. selection expression = annulus(25161.502000, 39143.858000, 2414.440069, 4828.880139, X, Y) && !ellipse(22463.610000, 36593.450000, 910.280026, 910.280026, 0.000000, X, Y) && !ellipse(23449.600780, 36635.579800, 629.746418, 629.746418, 0.000000, X, Y) && !ellipse(23957.742400, 39337.445600, 2452.552071, 943.616027, 290.136000, X, Y) && !ellipse(23699.078000, 37472.326600, 1081.336031, 1081.336031, 0.000000, X, Y) && !ellipse(26485.850000, 39907.274000, 1745.864050, 1745.864050, 0.000000, X, Y) && !ellipse(25562.176000, 39468.040000, 952.824027, 952.824027, 0.000000, X, Y) && !ellipse(25378.892000, 38337.785400, 1845.320053, 1845.320053, 0.000000, X, Y) && !ellipse(26908.293884, 39813.783295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23010.716187, 38055.415802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.474213, 37461.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.763062, 37081.582916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.550000, 38895.382000, 3863.104111, 3863.104111, 0.000000, X, Y) && !ellipse(26193.055542, 40698.675354, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 13:19:27 2012] Writing fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src15.gif
[Tue Aug 21 13:50:28 2012] Mean detx,y = (962.56, 11559.97) 
[Tue Aug 21 13:50:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 13:51:07 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 13:51:08 2012] Setting source spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Aug 21 13:51:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Aug 21 16:20:33 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:33 2012] Error reading totcts from fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Aug 21 16:20:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:37 2012] Using photon index=1.80, rate=0.0172, arf fullrun_mos2_xmm0093670301_pi300-10000_pass1_cl_src15.arf
[Tue Aug 21 16:20:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:37 2012] Updating source flux to 3.4e-13
[Tue Aug 21 16:29:28 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Tue Aug 21 16:29:28 2012] Flag c found in src. 15 procflags, skipping spectral fitting