[Sun Aug 19 10:17:41 2012] Detection parameters:
  Position = (308.9, 286.2) = 17 11 53.26 -39 58 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 16.2
  Background counts = 52.9
  Rate = 0.006 +/- 0.001

[Sun Aug 19 10:17:41 2012] Off-axis axis estimate = 1.17'
[Sun Aug 19 19:19:05 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:19:05 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Sun Aug 19 19:19:05 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Sun Aug 19 19:19:05 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.01"
[Mon Aug 20 01:20:46 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src32.ximg exists
[Mon Aug 20 01:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src32.csv
[Mon Aug 20 01:20:46 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon Aug 20 01:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src32.csv
[Mon Aug 20 01:20:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:20:49 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon Aug 20 01:20:49 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Aug 20 01:20:49 2012] Fit fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Mon Aug 20 06:41:37 2012] Spatial fit model total counts = 1282.250000, observed total counts = 1281.000000
[Mon Aug 20 06:41:37 2012] Offset between fit and detection position for source 76 = 3.752140 pixels
[Mon Aug 20 06:41:37 2012] Warning, changing simple spatial fit ID from 32 to 14
[Mon Aug 20 06:41:37 2012] 1310.228000 total counts/ 1191.630000 bgd. counts: snr = 3.435632
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 3.752140 pixels
  Position = (309.4, 289.9) = 17 11 53.09 -39 58 7.2
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 118.6 +/- 36.2
  Background counts = 1191.6
  Rate = 0.008 +/- 0.002
[Mon Aug 20 06:41:37 2012] Spatial fit model total counts = 1114.170000, observed total counts = 1110.000000
[Mon Aug 20 06:41:37 2012] Offset between fit and detection position for source 76 = 1.329263 pixels
[Mon Aug 20 06:41:37 2012] Warning, changing simple spatial fit ID from 14 to 20
[Mon Aug 20 06:41:37 2012] 1081.502000 total counts/ 951.563000 bgd. counts: snr = 4.212314
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 1.329263 pixels
  Position = (308.1, 290.3) = 17 11 53.57 -39 58 5.7
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 129.9 +/- 32.9
  Background counts = 951.6
  Rate = 0.008 +/- 0.002
[Mon Aug 20 06:41:37 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:37 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:37 2012] Source does appear to be extended
[Mon Aug 20 06:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:37 2012] Source is confused with source 29
[Mon Aug 20 16:13:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 16:13:17 2012] Initial guess for spatial extent in simple fitting = 13.90"
[Mon Aug 20 16:13:17 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.025
[Mon Aug 20 16:13:17 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 13.90"
[Mon Aug 20 22:10:39 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src26.ximg exists
[Mon Aug 20 22:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src26.csv
[Mon Aug 20 22:10:39 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Aug 20 22:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src26.csv
[Mon Aug 20 22:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 22:10:41 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Aug 20 22:10:41 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Aug 20 22:10:41 2012] Fit fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Aug 21 03:40:03 2012] Warning, spatial fit 26 centroid is now closest to src. 29
[Tue Aug 21 03:40:03 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:03 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:03 2012] Source does appear to be extended
[Tue Aug 21 03:40:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 09:45:48 2012] XMMSAS src. selection expression = ellipse(26756.316000, 25206.000000, 834.282024, 834.282024, 0.000000, X, Y)
[Tue Aug 21 09:45:48 2012] Writing source region out to fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src76_src.reg
[Tue Aug 21 09:45:48 2012] Extracting stamp from image fullrun_mos1_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (260, 242) - (356, 338)
[Tue Aug 21 09:45:48 2012] XMMSAS bgd. selection expression = annulus(26756.316000, 25206.000000, 1390.470040, 2780.940080, X, Y) && !ellipse(27992.194870, 28469.789823, 1244.272036, 869.154564, 302.429257, X, Y) && !ellipse(27212.427600, 26762.884000, 930.480027, 930.480027, 0.000000, X, Y) && !ellipse(29229.055800, 27941.724000, 635.112818, 635.112818, 0.000000, X, Y) && !ellipse(28905.874207, 26133.967865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.192000, 27818.096000, 1188.616034, 1188.616034, 0.000000, X, Y) && !ellipse(27260.016235, 25616.478760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.884888, 26922.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22109.608600, 29731.424000, 2842.728082, 2842.728082, 0.000000, X, Y) && !ellipse(25857.702000, 24108.527200, 1143.040033, 593.768017, 157.907400, X, Y) && !ellipse(24641.497220, 22961.573200, 1169.376034, 1169.376034, 0.000000, X, Y) && !ellipse(25327.616000, 23889.728000, 1736.808050, 1736.808050, 0.000000, X, Y) && !ellipse(27828.264191, 24909.420563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28436.727875, 26398.005219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.418549, 27185.078033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28354.703400, 27168.186737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.715790, 26140.010712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.166000, 23949.894000, 1239.136036, 1239.136036, 0.000000, X, Y) && !ellipse(25074.280000, 23630.070000, 1156.928033, 1156.928033, 0.000000, X, Y) && !ellipse(28658.823730, 27527.706909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.365600, 23022.012600, 691.120020, 691.120020, 0.000000, X, Y) && !ellipse(27836.523987, 23579.280090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28651.071045, 24336.821014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.704000, 29156.176000, 1346.768039, 1346.768039, 0.000000, X, Y)
[Tue Aug 21 09:45:48 2012] Writing fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src76.gif
[Tue Aug 21 10:11:11 2012] Mean detx,y = (-2147.89, -592.03) 
[Tue Aug 21 10:11:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 10:11:28 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 10:11:28 2012] Setting source spectrum file to fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Aug 21 10:11:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue Aug 21 16:20:23 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:23 2012] Error reading totcts from fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Aug 21 16:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:27 2012] Using photon index=1.80, rate=0.00833, arf fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src76.arf
[Tue Aug 21 16:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:27 2012] Updating source flux to 8.3e-14
[Tue Aug 21 16:20:41 2012] Flag c found in src. 76 procflags, skipping spectral fitting