[Sun Aug 19 10:17:40 2012] Detection parameters:
  Position = (429.8, 395.8) = 17 11 7.61 -39 50 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.4 +/- 9.6
  Background counts = 11.2
  Rate = 0.006 +/- 0.001

[Sun Aug 19 10:17:41 2012] Off-axis axis estimate = 11.86'
[Sun Aug 19 19:19:05 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:19:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 19:19:05 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Aug 19 19:19:05 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.098
[Sun Aug 19 19:19:05 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.36"
[Mon Aug 20 01:20:46 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src33.ximg exists
[Mon Aug 20 01:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src33.csv
[Mon Aug 20 01:20:46 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Aug 20 01:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src33.csv
[Mon Aug 20 01:20:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:20:49 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Aug 20 01:20:49 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Aug 20 01:20:49 2012] Fit fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Aug 20 06:41:37 2012] Spatial fit model total counts = 178.995000, observed total counts = 179.000000
[Mon Aug 20 06:41:37 2012] Offset between fit and detection position for source 54 = 0.294198 pixels
[Mon Aug 20 06:41:37 2012] 181.770600 total counts/ 158.271000 bgd. counts: snr = 1.867927
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.294198 pixels
  Position = (429.6, 395.6) = 17 11 7.68 -39 50 27.0
  Extent = 3.2 (3.1-4.8)", rotation angle = 0
  Source counts = 23.5 +/- 13.5
  Background counts = 158.3
  Rate = 0.002 +/- 0.0009
[Mon Aug 20 06:41:37 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:37 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:37 2012] Source does appear to be extended
[Mon Aug 20 06:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:37 2012] Deleting source due to low Poisson probability 0.8