[Sun Aug 19 10:17:40 2012] Detection parameters:
  Position = (238.7, 403.8) = 17 12 19.78 -39 49 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.3 +/- 11.6
  Background counts = 26.8
  Rate = 0.006 +/- 0.001

[Sun Aug 19 10:17:41 2012] Off-axis axis estimate = 8.78'
[Sun Aug 19 19:19:05 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:19:05 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Sun Aug 19 19:19:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Sun Aug 19 19:19:05 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.82"
[Mon Aug 20 01:20:46 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src31.ximg exists
[Mon Aug 20 01:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src31.csv
[Mon Aug 20 01:20:46 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Aug 20 01:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src31.csv
[Mon Aug 20 01:20:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:20:48 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Aug 20 01:20:49 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Aug 20 01:20:49 2012] Fit fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Aug 20 06:41:37 2012] Spatial fit model total counts = 500.577000, observed total counts = 497.000000
[Mon Aug 20 06:41:37 2012] Offset between fit and detection position for source 53 = 5.734574 pixels
[Mon Aug 20 06:41:37 2012] Warning, changing simple spatial fit ID from 31 to 29
[Mon Aug 20 06:41:37 2012] 512.357000 total counts/ 412.289000 bgd. counts: snr = 4.928268
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 5.734574 pixels
  Position = (235.6, 408.7) = 17 12 20.95 -39 49 30.5
  Extent = 21.9 (21.9-21.9)", rotation angle = 0
  Source counts = 100.1 +/- 22.6
  Background counts = 412.3
  Rate = 0.006 +/- 0.001
[Mon Aug 20 06:41:37 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 06:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 06:41:37 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 06:41:37 2012] Source does appear to be extended
[Mon Aug 20 06:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 06:41:37 2012] Source is confused with source 51
[Mon Aug 20 16:13:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 16:13:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 16:13:17 2012] Initial guess for spatial extent in simple fitting = 21.89"
[Mon Aug 20 16:13:17 2012] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.988
[Mon Aug 20 16:13:17 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 21.89"
[Mon Aug 20 22:10:39 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src25.ximg exists
[Mon Aug 20 22:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src25.csv
[Mon Aug 20 22:10:39 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Aug 20 22:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src25.csv
[Mon Aug 20 22:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 22:10:41 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Aug 20 22:10:41 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Aug 20 22:10:41 2012] Fit fullrun_mos1_xmm0093670301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Aug 21 03:40:03 2012] Warning, spatial fit 25 centroid is now closest to src. 18
[Tue Aug 21 03:40:03 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 03:40:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 03:40:03 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 03:40:03 2012] Source does appear to be extended
[Tue Aug 21 03:40:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 09:45:48 2012] XMMSAS src. selection expression = ellipse(20450.428000, 35505.540000, 1313.340038, 1313.340038, 0.000000, X, Y)
[Tue Aug 21 09:45:48 2012] Writing source region out to fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src53_src.reg
[Tue Aug 21 09:45:48 2012] Extracting stamp from image fullrun_mos1_xmm0093670301_pi300-10000_cl_sm2.00.img.gz, (160, 333) - (311, 484)
[Tue Aug 21 09:45:48 2012] XMMSAS bgd. selection expression = annulus(20450.428000, 35505.540000, 2188.900063, 4377.800126, X, Y) && !ellipse(21754.117371, 30487.530914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21950.516000, 30145.920000, 1440.720041, 1440.720041, 0.000000, X, Y) && !ellipse(22109.608600, 29731.424000, 2842.728082, 2842.728082, 0.000000, X, Y) && !ellipse(24162.528961, 37795.483124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22289.520000, 36795.358000, 1825.584053, 1495.432043, 314.340000, X, Y) && !ellipse(23970.716600, 30815.637400, 1380.632040, 1380.632040, 0.000000, X, Y) && !ellipse(21392.892000, 36001.252000, 3321.016096, 3321.016096, 0.000000, X, Y) && !ellipse(25257.534729, 38275.785889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22587.990387, 36903.911011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24354.208801, 37342.731598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24669.777618, 38948.041962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23844.501587, 38745.014526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22630.022156, 37410.395020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24349.769592, 39166.038452, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 09:45:48 2012] Writing fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src53.gif
[Tue Aug 21 10:10:18 2012] Mean detx,y = (8465.61, -5816.95) 
[Tue Aug 21 10:10:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 10:11:04 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 10:11:04 2012] Setting source spectrum file to fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Aug 21 10:11:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue Aug 21 16:20:23 2012] Updating aperture counts using extracted products
[Tue Aug 21 16:20:23 2012] Error reading totcts from fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Aug 21 16:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 16:20:27 2012] Using photon index=1.80, rate=0.00642, arf fullrun_mos1_xmm0093670301_pi300-10000_pass1_cl_src53.arf
[Tue Aug 21 16:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 16:20:27 2012] Updating source flux to 1e-13
[Tue Aug 21 16:20:41 2012] Flag c found in src. 53 procflags, skipping spectral fitting