[Sun Aug 19 10:17:39 2012] Detection parameters:
  Position = (261.9, 440.8) = 17 12 11.02 -39 47 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 11.0
  Background counts = 23.7
  Rate = 0.003 +/- 0.0007

[Sun Aug 19 10:17:41 2012] Off-axis axis estimate = 10.66'
[Sun Aug 19 19:19:05 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 19:19:05 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Sun Aug 19 19:19:05 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.877
[Sun Aug 19 19:19:05 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 11.76"
[Mon Aug 20 01:20:47 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src79.ximg exists
[Mon Aug 20 01:20:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src79.csv
[Mon Aug 20 01:20:47 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Aug 20 01:20:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src79.csv
[Mon Aug 20 01:20:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:20:51 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Aug 20 01:20:51 2012] fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Aug 20 01:20:51 2012] Fit fullrun_mos1_xmm0093670301_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Mon Aug 20 06:41:37 2012] Source 39 is offset by -5.859581 and 5.228078 pixels which is larger than
2 X fitted extent = 3.474874 x 3.474874, not incorporating fit results
[Mon Aug 20 06:41:37 2012] Spatial fit model total counts = 393.683000, observed total counts = 399.000000
[Mon Aug 20 06:41:37 2012] Offset between fit and detection position for source 39 = 0.587345 pixels
[Mon Aug 20 06:41:37 2012] 376.717000 total counts/ 361.307000 bgd. counts: snr = 0.810708
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.587345 pixels
  Position = (261.5, 441.3) = 17 12 11.17 -39 47 8.8
  Extent = 4.2 (2.9-10.3)", rotation angle = 0
  Source counts = 15.4 +/- 19.4
  Background counts = 361.3
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability