[Sun Jun 16 01:35:32 2013] Detection parameters:
  Position = (293.5, 293.1) = 17 12 5.30 -39 33 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.7 +/- 21.5
  Background counts = 126.7
  Rate = 0.02 +/- 0.003

[Sun Jun 16 01:35:33 2013] Off-axis axis estimate = 0.53'
[Sun Jun 16 01:41:57 2013] Using EEF radius (= 6.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:41:57 2013] Initial guess for spatial extent in simple fitting = 6.69"
[Sun Jun 16 01:41:57 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.203
[Sun Jun 16 01:41:57 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 6.69"
[Sun Jun 16 07:55:49 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src47.ximg exists
[Sun Jun 16 07:55:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src47.csv
[Sun Jun 16 07:55:49 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Jun 16 07:55:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src47.csv
[Sun Jun 16 07:55:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 07:55:51 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Jun 16 07:55:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sun Jun 16 07:55:51 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Jun 16 07:55:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sun Jun 16 07:55:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 18:18:43 2013] Source 50 is offset by -0.232179 and 1.227041 pixels which is larger than
2 X fitted extent = 0.750446 x 0.750446, not incorporating fit results
[Sun Jun 16 18:18:43 2013] Source 50 is offset by -0.242326 and 1.237174 pixels which is larger than
2 X fitted extent = 0.769618 x 0.769618, not incorporating fit results
[Sun Jun 16 18:18:43 2013] Source 50 is offset by -0.308765 and 1.245455 pixels which is larger than
2 X fitted extent = 0.786901 x 0.786901, not incorporating fit results
[Sun Jun 16 18:18:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 18:18:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 18:18:44 2013] Assessing source extent using major
[Sun Jun 16 18:18:44 2013] Source does appear to be extended
[Sun Jun 16 18:18:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 18:18:44 2013] Source is confused with source 45
[Sun Jun 16 18:19:48 2013] Using EEF radius (= 6.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 18:19:48 2013] Initial guess for spatial extent in simple fitting = 6.69"
[Sun Jun 16 18:19:48 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.203
[Sun Jun 16 18:19:48 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 6.69"
[Sun Jun 16 21:22:27 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src38.ximg exists
[Sun Jun 16 21:22:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src38.csv
[Sun Jun 16 21:22:27 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Jun 16 21:22:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src38.csv
[Sun Jun 16 21:22:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 21:22:29 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Jun 16 21:22:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun Jun 16 21:22:29 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Jun 16 21:22:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun Jun 16 21:22:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:46:50 2013] Warning, spatial fit 38 centroid is now closest to src. 52
[Mon Jun 17 05:46:50 2013] Source 50 is offset by -0.282558 and 1.233478 pixels which is larger than
2 X fitted extent = 0.786901 x 0.786901, not incorporating fit results
[Mon Jun 17 05:46:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:46:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:46:50 2013] Assessing source extent using major
[Mon Jun 17 05:46:50 2013] Source does appear to be extended
[Mon Jun 17 05:46:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 05:47:56 2013] XMMSAS src. selection expression = ellipse(25483.618439, 25452.870544, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 05:47:56 2013] Writing source region out to fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50_src.reg
[Mon Jun 17 05:47:56 2013] Extracting stamp from image fullrun_pn_xmm0093670201_pi300-10000_cl_sm2.00.img.gz, (256, 256) - (331, 331)
[Mon Jun 17 05:47:56 2013] XMMSAS bgd. selection expression = annulus(25483.618439, 25452.870544, 1087.500000, 2175.000000, X, Y) && !ellipse(25725.465400, 26615.683400, 436.941613, 436.941613, 0.000000, X, Y) && !ellipse(24717.228302, 27794.513458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.901642, 27169.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27857.102000, 27121.449400, 1201.360035, 367.484011, 116.961500, X, Y) && !ellipse(27026.355072, 28142.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25483.124603, 27584.728973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26010.632000, 26959.628000, 1125.736032, 285.957608, 109.171100, X, Y) && !ellipse(25127.979919, 27092.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26632.927521, 27184.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27680.363129, 26397.760956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.207214, 26215.264862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27886.148100, 25786.752200, 1163.912033, 1163.912033, 0.000000, X, Y) && !ellipse(24500.846069, 26255.260223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28763.862000, 26392.862000, 2481.808071, 1091.400031, 59.179800, X, Y) && !ellipse(25901.907684, 25705.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.084595, 24928.826172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.754089, 24876.009674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29589.881000, 21755.431600, 2012.016058, 1135.096033, 105.746000, X, Y)
[Mon Jun 17 05:47:56 2013] Writing fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50.gif
[Mon Jun 17 06:17:35 2013] Mean detx,y = (-1475.80, 1893.54) 
[Mon Jun 17 06:17:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:18:05 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:18:05 2013] Setting source spectrum file to fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jun 17 06:18:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jun 17 07:23:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 07:23:39 2013] rmf not generated due to insufficient counts
[Mon Jun 17 11:40:55 2013] Updating aperture counts using extracted products
[Mon Jun 17 11:40:55 2013] Total counts from fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 1325.00
[Mon Jun 17 11:40:55 2013] Total counts from fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50_bgd.pi.gz = 2309.00
[Mon Jun 17 11:40:55 2013] Got source and background scale factors 1277808.000000, 3697333.000000
[Mon Jun 17 11:40:55 2013] User source parameters:
  Position = (293.5, 293.1) = 17 12 5.30 -39 33 10.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 527.0 +/- 37.4
  Background aperture counts = 798.0
  Rate = 0.05 +/- 0.004

[Mon Jun 17 11:40:55 2013] Updating counts from extracted products
[Mon Jun 17 11:40:55 2013] Set source signif. to 527.00/28.25 = 18.66
[Mon Jun 17 11:40:59 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 11:40:59 2013] Using photon index=1.80, rate=0.0533, arf fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50.arf
[Mon Jun 17 11:40:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 11:40:59 2013] Updating source flux to 4e-13
[Mon Jun 17 11:41:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 11:41:54 2013] xmm0093670201/analysis//spectral/fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete