[Sun Jun 16 01:35:32 2013] Detection parameters:
  Position = (282.2, 302.3) = 17 12 9.54 -39 32 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.1 +/- 15.8
  Background counts = 115.7
  Rate = 0.01 +/- 0.002

[Sun Jun 16 01:35:33 2013] Off-axis axis estimate = 1.21'
[Sun Jun 16 01:41:57 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:41:57 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Sun Jun 16 01:41:57 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.669
[Sun Jun 16 01:41:57 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.03"
[Sun Jun 16 07:55:49 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun 16 07:55:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src39.csv
[Sun Jun 16 07:55:49 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun 16 07:55:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src39.csv
[Sun Jun 16 07:55:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 07:55:51 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun 16 07:55:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 16 07:55:51 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun 16 07:55:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 16 07:55:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 18:18:43 2013] Source 42 is offset by -2.788712 and 2.014095 pixels which is larger than
2 X fitted extent = 1.123416 x 1.123416, not incorporating fit results
[Sun Jun 16 18:18:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 18:18:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 18:18:44 2013] Assessing source extent using major
[Sun Jun 16 18:18:44 2013] Source does appear to be extended
[Sun Jun 16 18:18:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 18:19:48 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 18:19:48 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Sun Jun 16 18:19:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.669
[Sun Jun 16 18:19:48 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 7.03"
[Sun Jun 16 21:22:27 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src32.ximg exists
[Sun Jun 16 21:22:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src32.csv
[Sun Jun 16 21:22:27 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Jun 16 21:22:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src32.csv
[Sun Jun 16 21:22:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 21:22:29 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Jun 16 21:22:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun Jun 16 21:22:29 2013] fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Jun 16 21:22:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun Jun 16 21:22:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:46:50 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 93.675569 pixels away
[Mon Jun 17 05:46:50 2013] Source 42 is offset by 6.645150 and 5.810830 pixels which is larger than
2 X fitted extent = 1.839899 x 1.839899, not incorporating fit results
[Mon Jun 17 05:46:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:46:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:46:50 2013] Assessing source extent using major
[Mon Jun 17 05:46:50 2013] Source does appear to be extended
[Mon Jun 17 05:46:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 05:47:56 2013] XMMSAS src. selection expression = ellipse(24500.846069, 26255.260223, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 05:47:56 2013] Writing source region out to fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42_src.reg
[Mon Jun 17 05:47:56 2013] Extracting stamp from image fullrun_pn_xmm0093670201_pi300-10000_cl_sm2.00.img.gz, (245, 265) - (320, 340)
[Mon Jun 17 05:47:56 2013] XMMSAS bgd. selection expression = annulus(24500.846069, 26255.260223, 1087.500000, 2175.000000, X, Y) && !ellipse(25725.465400, 26615.683400, 436.941613, 436.941613, 0.000000, X, Y) && !ellipse(24717.228302, 27794.513458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.901642, 27169.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27857.102000, 27121.449400, 1201.360035, 367.484011, 116.961500, X, Y) && !ellipse(27026.355072, 28142.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25483.124603, 27584.728973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26010.632000, 26959.628000, 1125.736032, 285.957608, 109.171100, X, Y) && !ellipse(25127.979919, 27092.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26632.927521, 27184.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.207214, 26215.264862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28763.862000, 26392.862000, 2481.808071, 1091.400031, 59.179800, X, Y) && !ellipse(25901.907684, 25705.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25483.618439, 25452.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.084595, 24928.826172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.754089, 24876.009674, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 05:47:56 2013] Writing fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42.gif
[Mon Jun 17 06:12:57 2013] Mean detx,y = (-2476.08, 1018.70) 
[Mon Jun 17 06:13:02 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:13:38 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:13:38 2013] Setting source spectrum file to fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Jun 17 06:13:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Jun 17 07:17:16 2013] Not generating rmf since there are only 85 counts
[Mon Jun 17 07:17:16 2013] rmf not generated due to insufficient counts
[Mon Jun 17 11:40:54 2013] Updating aperture counts using extracted products
[Mon Jun 17 11:40:54 2013] Total counts from fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 877.00
[Mon Jun 17 11:40:54 2013] Total counts from fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42_bgd.pi.gz = 2400.00
[Mon Jun 17 11:40:54 2013] Got source and background scale factors 1002990.000000, 4322714.000000
[Mon Jun 17 11:40:54 2013] User source parameters:
  Position = (282.2, 302.3) = 17 12 9.54 -39 32 32.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 320.1 +/- 30.6
  Background aperture counts = 556.9
  Rate = 0.03 +/- 0.003

[Mon Jun 17 11:40:54 2013] Updating counts from extracted products
[Mon Jun 17 11:40:54 2013] Set source signif. to 320.13/23.60 = 13.57
[Mon Jun 17 11:40:58 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 11:40:58 2013] Using photon index=1.80, rate=0.0324, arf fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42.arf
[Mon Jun 17 11:40:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 11:40:58 2013] Updating source flux to 3.9e-13
[Mon Jun 17 11:41:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 11:41:54 2013] xmm0093670201/analysis//spectral/fullrun_pn_xmm0093670201_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete