[Sun Jun 16 01:38:08 2013] Detection parameters:
  Position = (338.0, 250.1) = 17 11 48.53 -39 36 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.5 +/- 17.6
  Background counts = 58.8
  Rate = 0.01 +/- 0.001

[Sun Jun 16 01:38:09 2013] Off-axis axis estimate = 4.53'
[Sun Jun 16 14:14:33 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 14:14:33 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Jun 16 14:14:33 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Sun Jun 16 14:14:33 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 8.69"
[Sun Jun 16 18:18:14 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 16 18:18:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_src12.csv
[Sun Jun 16 18:18:14 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 16 18:18:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_src12.csv
[Sun Jun 16 18:18:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 18:18:16 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 16 18:18:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 16 18:18:16 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 16 18:18:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 16 18:18:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 18:19:26 2013] Spatial fit model total counts = 1087.280000, observed total counts = 984.000000
[Sun Jun 16 18:19:26 2013] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 18:19:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 18:19:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 18:19:26 2013] Assessing source extent using major
[Sun Jun 16 18:19:26 2013] Source does appear to be extended
[Sun Jun 16 18:19:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 18:19:26 2013] Source is confused with source 53
[Sun Jun 16 18:19:26 2013] Source is confused with source 54
[Mon Jun 17 02:06:02 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 02:06:02 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Mon Jun 17 02:06:02 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Mon Jun 17 02:06:02 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.69"
[Mon Jun 17 05:46:24 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jun 17 05:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_src10.csv
[Mon Jun 17 05:46:24 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jun 17 05:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_src10.csv
[Mon Jun 17 05:46:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:46:26 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jun 17 05:46:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jun 17 05:46:26 2013] fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jun 17 05:46:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jun 17 05:46:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:47:29 2013] Warning, spatial fit 10 centroid is now closest to src. 57
[Mon Jun 17 05:47:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:47:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:47:29 2013] Assessing source extent using major
[Mon Jun 17 05:47:29 2013] Source does appear to be extended
[Mon Jun 17 05:47:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 09:51:36 2013] XMMSAS src. selection expression = ellipse(29358.248718, 21709.700058, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 09:51:36 2013] Writing source region out to fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56_src.reg
[Mon Jun 17 09:51:36 2013] Extracting stamp from image fullrun_mos2_xmm0093670201_pi300-10000_cl_sm2.00.img.gz, (301, 213) - (376, 288)
[Mon Jun 17 09:51:36 2013] XMMSAS bgd. selection expression = annulus(29358.248718, 21709.700058, 1087.500000, 2175.000000, X, Y) && !ellipse(29611.634094, 20481.127731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28255.912800, 19389.013600, 1422.720041, 209.434406, 355.206580, X, Y) && !ellipse(29318.160431, 19461.912430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.621674, 21334.199265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29233.210600, 19795.760000, 1473.560042, 1473.560042, 0.000000, X, Y) && !ellipse(29138.644400, 24661.825600, 985.912028, 985.912028, 0.000000, X, Y) && !ellipse(27071.248962, 21299.190048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.201200, 22091.788000, 1319.656038, 1319.656038, 0.000000, X, Y) && !ellipse(27879.562012, 20150.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.163391, 18994.887466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26463.942000, 23397.802000, 1180.344034, 638.872818, 76.987000, X, Y) && !ellipse(29528.638200, 22453.772000, 2639.312076, 1672.392048, 284.132000, X, Y) && !ellipse(29061.947449, 22221.183487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30843.201800, 23820.727480, 1822.800052, 564.501616, 96.249730, X, Y) && !ellipse(25539.824400, 24349.545600, 2255.696065, 681.164020, 68.396000, X, Y)
[Mon Jun 17 09:51:36 2013] Writing fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56.gif
[Mon Jun 17 09:54:50 2013] Mean detx,y = (-1978.45, -5994.51) 
[Mon Jun 17 09:54:51 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 09:55:00 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 09:55:00 2013] Setting source spectrum file to fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Jun 17 09:55:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon Jun 17 10:22:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 10:22:33 2013] rmf not generated due to insufficient counts
[Mon Jun 17 11:41:08 2013] Updating aperture counts using extracted products
[Mon Jun 17 11:41:08 2013] Total counts from fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 734.00
[Mon Jun 17 11:41:09 2013] Total counts from fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56_bgd.pi.gz = 281.00
[Mon Jun 17 11:41:09 2013] Got source and background scale factors 1289664.000000, 946842.000000
[Mon Jun 17 11:41:09 2013] User source parameters:
  Position = (338.0, 250.1) = 17 11 48.53 -39 36 14.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 351.3 +/- 28.1
  Background aperture counts = 382.7
  Rate = 0.02 +/- 0.002

[Mon Jun 17 11:41:09 2013] Updating counts from extracted products
[Mon Jun 17 11:41:09 2013] Set source signif. to 351.26/19.56 = 17.95
[Mon Jun 17 11:41:14 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 11:41:14 2013] Using photon index=1.80, rate=0.0245, arf fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56.arf
[Mon Jun 17 11:41:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 11:41:14 2013] Updating source flux to 5.5e-13
[Mon Jun 17 11:41:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 11:41:42 2013] xmm0093670201/analysis//spectral/fullrun_mos2_xmm0093670201_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete