[Sun Jun 16 01:36:44 2013] Detection parameters:
  Position = (374.1, 318.9) = 17 11 35.00 -39 31 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 17.4
  Background counts = 85.8
  Rate = 0.007 +/- 0.001

[Sun Jun 16 01:36:47 2013] Off-axis axis estimate = 5.68'
[Sun Jun 16 07:55:52 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 07:55:52 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Sun Jun 16 07:55:52 2013] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.300
[Sun Jun 16 07:55:52 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.27"
[Sun Jun 16 14:14:30 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jun 16 14:14:30 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jun 16 14:14:30 2013] Fit fullrun_mos1_xmm0093670201_pi300-10000_cl_pass0_src38 appears to have run properly
[Sun Jun 16 14:14:32 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jun 16 14:14:32 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jun 16 14:14:32 2013] Fit fullrun_mos1_xmm0093670201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jun 16 18:19:05 2013] Spatial fit model total counts = 1268.900000, observed total counts = 1269.000000
[Sun Jun 16 18:19:05 2013] Offset between fit and detection position for source 31 = 5.942335 pixels
[Sun Jun 16 18:19:05 2013] 1171.970000 total counts/ 897.105000 bgd. counts: snr = 9.176938
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 5.942335 pixels
  Position = (376.0, 324.5) = 17 11 34.26 -39 30 51.1
  Extent = 18.5 (13.5-37.1)" x 12.5 (7.2-17.1)", rotation angle = 292 (257-317) degrees
  Source counts = 274.9 +/- 34.2
  Background counts = 897.1
  Rate = 0.02 +/- 0.002
[Sun Jun 16 18:19:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 18:19:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 18:19:05 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 18:19:05 2013] Source does appear to be extended
[Sun Jun 16 18:19:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Sun Jun 16 18:19:05 2013] Source is confused with source 24
[Sun Jun 16 21:22:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 21:22:29 2013] Initial guess for spatial extent in simple fitting = 15.49"
[Sun Jun 16 21:22:29 2013] source mask rpix=3.6, npix_max = 65, mask sum = 72, frac = 1.091
[Sun Jun 16 21:22:29 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 15.49"
[Mon Jun 17 02:05:59 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_src32.ximg exists
[Mon Jun 17 02:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_src32.csv
[Mon Jun 17 02:05:59 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Jun 17 02:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_src32.csv
[Mon Jun 17 02:05:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 02:06:01 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Jun 17 02:06:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon Jun 17 02:06:01 2013] fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Jun 17 02:06:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon Jun 17 02:06:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670201_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 05:47:14 2013] Warning, spatial fit 32 centroid is now closest to src. 21
[Mon Jun 17 05:47:14 2013] Source 31 is offset by 1.685538 and 0.163908 pixels which is larger than
2 X fitted extent = 1.292087 x 1.292087, not incorporating fit results
[Mon Jun 17 05:47:14 2013] Source 31 is offset by -0.995818 and 3.727494 pixels which is larger than
2 X fitted extent = 2.089283 x 2.089283, not incorporating fit results
[Mon Jun 17 05:47:14 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 05:47:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 05:47:14 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 05:47:14 2013] Source does appear to be extended
[Mon Jun 17 05:47:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Mon Jun 17 07:44:49 2013] XMMSAS src. selection expression = ellipse(32665.749800, 28187.030000, 1112.280032, 747.048021, 291.779000, X, Y)
[Mon Jun 17 07:44:49 2013] Writing source region out to fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31_src.reg
[Mon Jun 17 07:44:49 2013] Extracting stamp from image fullrun_mos1_xmm0093670201_pi300-10000_cl_sm2.00.img.gz, (312, 261) - (440, 388)
[Mon Jun 17 07:44:49 2013] XMMSAS bgd. selection expression = annulus(32665.749800, 28187.030000, 1853.800053, 3707.600107, X, Y) && !ellipse(36103.322000, 27441.194000, 1660.576048, 1660.576048, 0.000000, X, Y) && !ellipse(29204.156400, 25366.288400, 2473.488071, 1372.264039, 69.348000, X, Y) && !ellipse(35876.220000, 27635.945600, 1677.360048, 1025.704030, 87.064770, X, Y) && !ellipse(28868.952800, 26788.648000, 1212.776035, 1212.776035, 0.000000, X, Y) && !ellipse(32602.438600, 28167.218600, 1498.696043, 557.024016, 107.248500, X, Y) && !ellipse(37161.552399, 25706.409912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.611800, 24985.610800, 1249.192036, 611.153618, 116.606300, X, Y) && !ellipse(27503.064200, 27080.938800, 1766.016051, 1766.016051, 0.000000, X, Y) && !ellipse(35118.658000, 28661.278000, 901.352026, 901.352026, 0.000000, X, Y) && !ellipse(35070.873474, 29276.811005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28524.739441, 25696.365936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35946.826050, 26479.466827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32198.258000, 27365.068000, 2055.720059, 2055.720059, 0.000000, X, Y) && !ellipse(31371.684000, 27387.100000, 1450.512042, 1450.512042, 0.000000, X, Y) && !ellipse(31134.380000, 26685.534600, 1406.048040, 649.290419, 359.879484, X, Y) && !ellipse(35889.548000, 25320.680000, 1721.664050, 1096.776032, 81.403800, X, Y) && !ellipse(35298.544891, 27632.463745, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 07:44:49 2013] Writing fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31.gif
[Mon Jun 17 07:59:08 2013] Mean detx,y = (351.93, 5483.41) 
[Mon Jun 17 07:59:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 07:59:37 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 07:59:37 2013] Setting source spectrum file to fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Jun 17 07:59:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon Jun 17 11:41:03 2013] Updating aperture counts using extracted products
[Mon Jun 17 11:41:03 2013] Total counts from fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 1473.00
[Mon Jun 17 11:41:03 2013] Total counts from fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 6132.00
[Mon Jun 17 11:41:03 2013] Got source and background scale factors 2603914.000000, 15933769.000000
[Mon Jun 17 11:41:03 2013] User source parameters:
  Position = (376.0, 324.5) = 17 11 34.26 -39 30 51.1
  Extent = 18.5 (13.5-37.1)" x 12.5 (7.2-17.1)", rotation angle = 292 (257-317) degrees
  Source aperture counts = 470.9 +/- 39.4
  Background aperture counts = 1002.1
  Rate = 0.03 +/- 0.003

[Mon Jun 17 11:41:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 11:41:07 2013] Using photon index=1.80, rate=0.0191, arf fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31.arf
[Mon Jun 17 11:41:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 11:41:07 2013] Updating source flux to 3.8e-13
[Mon Jun 17 11:41:16 2013] Flag b found in src. 31 procflags, skipping spectral fitting
[Mon Jun 17 11:41:16 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Mon Jun 17 11:41:30 2013] xmm0093670201/analysis//spectral/fullrun_mos1_xmm0093670201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete