[Tue Jun 12 13:20:34 2012] Detection parameters:
  Position = (452.4, 278.8) = 17 13 17.63 -39 28 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 15.5
  Background counts = 58.5
  Rate = 0.009 +/- 0.002

[Tue Jun 12 13:20:35 2012] Off-axis axis estimate = 11.25'
[Tue Jun 12 14:14:37 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 14:14:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 14:14:37 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Tue Jun 12 14:14:37 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.981
[Tue Jun 12 14:14:37 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.06"
[Tue Jun 12 15:12:11 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 12 15:12:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_src15.csv
[Tue Jun 12 15:12:11 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 12 15:12:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_src15.csv
[Tue Jun 12 15:12:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 15:12:11 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 12 15:12:11 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 12 15:12:11 2012] Fit fullrun_mos2_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jun 12 15:12:19 2012] Source 14 is offset by -3.449529 and -3.830144 pixels which is larger than
2 X fitted extent = 1.436225 x 1.436225, not incorporating fit results
[Tue Jun 12 15:12:19 2012] Source 14 is offset by 0.703436 and 5.548913 pixels which is larger than
2 X fitted extent = 1.340294 x 1.340294, not incorporating fit results
[Tue Jun 12 15:12:19 2012] Warning, spatial fit 15 centroid is now closest to src. 12
[Tue Jun 12 15:12:19 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 15:12:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 15:12:19 2012] Assessing source extent using major
[Tue Jun 12 15:12:19 2012] Source does appear to be extended
[Tue Jun 12 15:12:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 16:17:31 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:17:31 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Tue Jun 12 16:17:31 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.981
[Tue Jun 12 16:17:31 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.06"
[Tue Jun 12 17:29:38 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jun 12 17:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_src13.csv
[Tue Jun 12 17:29:38 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jun 12 17:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_src13.csv
[Tue Jun 12 17:29:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 17:29:38 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jun 12 17:29:38 2012] fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jun 12 17:29:38 2012] Fit fullrun_mos2_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Jun 12 17:29:47 2012] Warning, spatial fit 13 centroid is now closest to src. 4
[Tue Jun 12 17:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 17:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 17:29:47 2012] Assessing source extent using major
[Tue Jun 12 17:29:47 2012] Source does appear to be extended
[Tue Jun 12 17:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 17:29:47 2012] Source is confused with source 4
[Tue Jun 12 17:29:47 2012] Source is confused with source 2
[Tue Jun 12 17:29:47 2012] Source is confused with source 18
[Tue Jun 12 17:57:56 2012] XMMSAS src. selection expression = ellipse(39312.542969, 24209.411469, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 17:57:56 2012] Writing source region out to fullrun_mos2_xmm0093670101_pi300-10000_pass1_cl_src14_src.reg
[Tue Jun 12 17:57:56 2012] Extracting stamp from image fullrun_mos2_xmm0093670101_pi300-10000_cl_sm2.00.img.gz, (415, 241) - (490, 316)
[Tue Jun 12 17:57:56 2012] XMMSAS bgd. selection expression = annulus(39312.542969, 24209.411469, 1087.500000, 2175.000000, X, Y) && !ellipse(37628.536600, 23204.815800, 1591.112046, 866.216025, 143.200657, X, Y) && !ellipse(38167.004028, 23957.600525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.222000, 23909.070000, 1928.920056, 1928.920056, 0.000000, X, Y) && !ellipse(38635.004000, 24395.924000, 1855.704053, 1855.704053, 0.000000, X, Y) && !ellipse(36422.852000, 21341.770000, 1798.256052, 1798.256052, 0.000000, X, Y) && !ellipse(37915.902000, 23433.022000, 3617.152104, 2223.992064, 317.974000, X, Y) && !ellipse(38707.687469, 24977.654816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36974.230000, 22612.876000, 3751.152108, 3751.152108, 0.000000, X, Y) && !ellipse(37698.954224, 24199.662201, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 17:57:56 2012] Writing fullrun_mos2_xmm0093670101_pi300-10000_pass1_cl_src14.gif
[Tue Jun 12 18:07:42 2012] Mean detx,y = (-12018.24, -4154.49) 
[Tue Jun 12 18:07:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 18:07:52 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 18:07:52 2012] Setting source spectrum file to fullrun_mos2_xmm0093670101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 12 18:07:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093670101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 12 18:35:26 2012] Not generating rmf since there are only 64 counts
[Tue Jun 12 18:35:26 2012] rmf not generated due to insufficient counts
[Tue Jun 12 18:42:02 2012] Updating aperture counts using extracted products
[Tue Jun 12 18:42:02 2012] Error reading totcts from fullrun_mos2_xmm0093670101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 12 18:42:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 18:42:02 2012] Using photon index=1.80, rate=0.00877, arf fullrun_mos2_xmm0093670101_pi300-10000_pass1_cl_src14.arf
[Tue Jun 12 18:42:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 18:42:02 2012] Updating source flux to 1.7e-13
[Tue Jun 12 18:42:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting