[Tue Jun 12 13:20:16 2012] Detection parameters:
  Position = (331.9, 281.9) = 17 14 2.92 -39 28 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.9 +/- 17.0
  Background counts = 76.0
  Rate = 0.006 +/- 0.001

[Tue Jun 12 13:20:16 2012] Off-axis axis estimate = 2.71'
[Tue Jun 12 13:34:55 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 13:34:55 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Jun 12 13:34:55 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Tue Jun 12 13:34:55 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.78"
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jun 12 14:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src13.csv
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jun 12 14:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src13.csv
[Tue Jun 12 14:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jun 12 14:14:37 2012] Fit fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jun 12 15:12:16 2012] Source 14 is offset by -5.100516 and -4.201003 pixels which is larger than
2 X fitted extent = 1.414184 x 1.414184, not incorporating fit results
[Tue Jun 12 15:12:16 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 15:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 15:12:16 2012] Assessing source extent using major
[Tue Jun 12 15:12:16 2012] Source does appear to be extended
[Tue Jun 12 15:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 15:17:10 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 15:17:10 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Jun 12 15:17:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Tue Jun 12 15:17:10 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.78"
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jun 12 16:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src11.csv
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jun 12 16:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src11.csv
[Tue Jun 12 16:17:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jun 12 16:17:31 2012] Fit fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jun 12 17:29:43 2012] Source 14 is offset by -3.138791 and 3.446169 pixels which is larger than
2 X fitted extent = 0.894460 x 0.894460, not incorporating fit results
[Tue Jun 12 17:29:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 17:29:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 17:29:43 2012] Assessing source extent using major
[Tue Jun 12 17:29:43 2012] Source does appear to be extended
[Tue Jun 12 17:29:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 17:32:51 2012] XMMSAS src. selection expression = ellipse(28825.809143, 24474.080719, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 17:32:51 2012] Writing source region out to fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src14_src.reg
[Tue Jun 12 17:32:51 2012] Extracting stamp from image fullrun_mos1_xmm0093670101_pi300-10000_cl_sm2.00.img.gz, (294, 244) - (369, 319)
[Tue Jun 12 17:32:51 2012] XMMSAS bgd. selection expression = annulus(28825.809143, 24474.080719, 1087.500000, 2175.000000, X, Y)
[Tue Jun 12 17:32:51 2012] Writing fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src14.gif
[Tue Jun 12 17:41:25 2012] Mean detx,y = (-3042.39, 1433.59) 
[Tue Jun 12 17:41:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 17:41:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 17:41:33 2012] Setting source spectrum file to fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 12 17:41:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 12 17:57:39 2012] Not generating rmf since there are only 81 counts
[Tue Jun 12 17:57:39 2012] rmf not generated due to insufficient counts
[Tue Jun 12 18:42:01 2012] Updating aperture counts using extracted products
[Tue Jun 12 18:42:01 2012] Error reading totcts from fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 12 18:42:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 18:42:02 2012] Using photon index=1.80, rate=0.00627, arf fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src14.arf
[Tue Jun 12 18:42:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 18:42:02 2012] Updating source flux to 6.6e-14
[Tue Jun 12 18:42:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting