[Tue Jun 12 13:20:16 2012] Detection parameters:
  Position = (432.3, 268.9) = 17 13 25.20 -39 29 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.4 +/- 21.6
  Background counts = 64.3
  Rate = 0.02 +/- 0.003

[Tue Jun 12 13:20:16 2012] Off-axis axis estimate = 9.93'
[Tue Jun 12 13:34:55 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 13:34:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 13:34:55 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Tue Jun 12 13:34:55 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.925
[Tue Jun 12 13:34:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.40"
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 14:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 14:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 14:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 14:14:37 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 14:14:37 2012] Fit fullrun_mos1_xmm0093670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 15:12:16 2012] Spatial fit model total counts = 1292.800000, observed total counts = 1288.000000
[Tue Jun 12 15:12:16 2012] Offset between fit and detection position for source 1 = 0.522226 pixels
[Tue Jun 12 15:12:16 2012] 1288.335000 total counts/ 1091.870000 bgd. counts: snr = 5.945655
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.522226 pixels
  Position = (431.8, 268.7) = 17 13 25.38 -39 29 23.5
  Extent = 14.3 (10.3-20.8)", rotation angle = 0
  Source counts = 196.5 +/- 35.9
  Background counts = 1091.9
  Rate = 0.02 +/- 0.004
[Tue Jun 12 15:12:16 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 15:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 15:12:16 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 15:12:16 2012] Source does appear to be extended
[Tue Jun 12 15:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 15:12:16 2012] Source is confused with source 2
[Tue Jun 12 15:12:16 2012] Source is confused with source 4
[Tue Jun 12 15:12:16 2012] Source is confused with source 5
[Tue Jun 12 15:12:16 2012] Source is confused with source 11
[Tue Jun 12 15:17:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 15:17:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 15:17:10 2012] Initial guess for spatial extent in simple fitting = 14.32"
[Tue Jun 12 15:17:10 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.112
[Tue Jun 12 15:17:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.32"
[Tue Jun 12 16:17:30 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 16:17:31 2012] Fit fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 16:17:31 2012] fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 16:17:31 2012] Fit fullrun_mos1_xmm0093670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 17:29:43 2012] Spatial fit model total counts = 1833.080000, observed total counts = 1827.000000
[Tue Jun 12 17:29:43 2012] Offset between fit and detection position for source 1 = 0.135992 pixels
[Tue Jun 12 17:29:43 2012] 1836.713000 total counts/ 1600.520000 bgd. counts: snr = 5.903866
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.135992 pixels
  Position = (431.9, 268.7) = 17 13 25.34 -39 29 23.7
  Extent = 16.1 (11.9-21.1)", rotation angle = 0
  Source counts = 236.2 +/- 42.9
  Background counts = 1600.5
  Rate = 0.03 +/- 0.005
[Tue Jun 12 17:29:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 17:29:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 17:29:43 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 17:29:43 2012] Source does appear to be extended
[Tue Jun 12 17:29:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 17:32:51 2012] XMMSAS src. selection expression = ellipse(37527.356000, 23325.907800, 965.802028, 965.802028, 0.000000, X, Y)
[Tue Jun 12 17:32:51 2012] Writing source region out to fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 12 17:32:51 2012] Extracting stamp from image fullrun_mos1_xmm0093670101_pi300-10000_cl_sm2.00.img.gz, (376, 213) - (487, 324)
[Tue Jun 12 17:32:51 2012] XMMSAS bgd. selection expression = annulus(37527.356000, 23325.907800, 1609.670046, 3219.340093, X, Y) && !ellipse(37654.502000, 23363.430000, 1824.824053, 1824.824053, 0.000000, X, Y) && !ellipse(38807.229828, 24409.444031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37734.690918, 24040.533020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37438.349823, 22757.819336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34350.603851, 26227.605438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37019.370000, 22383.064000, 1800.504052, 1800.504052, 0.000000, X, Y) && !ellipse(36047.512000, 21405.442000, 3598.960104, 3598.960104, 0.000000, X, Y) && !ellipse(34636.510681, 20225.066086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38897.678711, 23946.345856, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 17:32:51 2012] Writing fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 12 17:32:53 2012] Mean detx,y = (-4773.58, 10073.57) 
[Tue Jun 12 17:32:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 17:33:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 17:33:01 2012] Setting source spectrum file to fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 17:33:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 12 18:42:01 2012] Updating aperture counts using extracted products
[Tue Jun 12 18:42:01 2012] Error reading totcts from fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 12 18:42:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 18:42:02 2012] Using photon index=1.80, rate=0.0269, arf fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 18:42:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 18:42:02 2012] Updating source flux to 4.1e-13
[Tue Jun 12 18:42:03 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jun 12 18:42:57 2012] Reading fit data from xmm0093670101/analysis//spectral/fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun 12 18:42:57 2012] Spectral fit parameter nH value = 7.65918e+21
[Tue Jun 12 18:42:57 2012] Spectral fit parameter PhoIndex value = 1.98354
[Tue Jun 12 18:42:57 2012] Failed to get F(0.3-8.0) from xmm0093670101/analysis//spectral/fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 18:42:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 18:42:57 2012] Using Nh = 7.7e+21, photon index=1.98, rate=0.0269, arf fullrun_mos1_xmm0093670101_pi300-10000_pass1_cl_src1.arf
[Tue Jun 12 18:42:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 18:42:57 2012] Updating source flux to 5.9e-13