[Wed Mar 21 09:32:28 2012] Detection parameters:
  Position = (269.5, 307.9) = 13 25 37.34 -42 58 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.0 +/- 18.5
  Background counts = 37.7
  Rate = 0.02 +/- 0.003

[Wed Mar 21 09:32:29 2012] Off-axis axis estimate = 2.21'
[Wed Mar 21 09:35:47 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 09:35:47 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Wed Mar 21 09:35:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.004
[Wed Mar 21 09:35:47 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.53"
[Wed Mar 21 15:10:53 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src53.ximg exists
[Wed Mar 21 15:10:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src53.csv
[Wed Mar 21 15:10:53 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Mar 21 15:10:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src53.csv
[Wed Mar 21 15:10:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 15:10:55 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Mar 21 15:10:55 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Mar 21 15:10:55 2012] Fit fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Wed Mar 21 21:29:10 2012] Warning, spatial fit 53 centroid is now closest to src. 52
[Wed Mar 21 21:29:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 21:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 21:29:10 2012] Assessing source extent using major
[Wed Mar 21 21:29:10 2012] Source does appear to be extended
[Wed Mar 21 21:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 21:29:10 2012] Source is confused with source 52
[Wed Mar 21 21:30:02 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 21:30:02 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Wed Mar 21 21:30:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.004
[Wed Mar 21 21:30:02 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.53"
[Thu Mar 22 02:38:21 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src45.ximg exists
[Thu Mar 22 02:38:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src45.csv
[Thu Mar 22 02:38:21 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Mar 22 02:38:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src45.csv
[Thu Mar 22 02:38:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 02:38:23 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Mar 22 02:38:23 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Mar 22 02:38:23 2012] Fit fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Thu Mar 22 06:13:45 2012] Source 56 is offset by 2.087563 and -3.471397 pixels which is larger than
2 X fitted extent = 1.297186 x 1.297186, not incorporating fit results
[Thu Mar 22 06:13:46 2012] Spatial fit model total counts = 1192.760000, observed total counts = 1197.000000
[Thu Mar 22 06:13:46 2012] Offset between fit and detection position for source 56 = 5.817373 pixels
[Thu Mar 22 06:13:46 2012] Warning, changing simple spatial fit ID from 45 to 41
[Thu Mar 22 06:13:46 2012] 1186.763000 total counts/ 656.040000 bgd. counts: snr = 20.720620
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 5.817373 pixels
  Position = (265.6, 312.2) = 13 25 38.88 -42 58 25.0
  Extent = 27.2 (19.6-31.2)", rotation angle = 0
  Source counts = 530.7 +/- 34.4
  Background counts = 656.0
  Rate = 0.06 +/- 0.004
[Thu Mar 22 06:13:46 2012] Spatial fit model total counts = 949.310000, observed total counts = 941.000000
[Thu Mar 22 06:13:46 2012] Offset between fit and detection position for source 56 = 1.530146 pixels
[Thu Mar 22 06:13:46 2012] Warning, changing simple spatial fit ID from 41 to 45
[Thu Mar 22 06:13:46 2012] 914.779000 total counts/ 667.501000 bgd. counts: snr = 9.571049
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 1.530146 pixels
  Position = (264.7, 313.5) = 13 25 39.23 -42 58 19.5
  Extent = 14.9 (14.7-15.1)", rotation angle = 0
  Source counts = 247.3 +/- 30.2
  Background counts = 667.5
  Rate = 0.03 +/- 0.003
[Thu Mar 22 06:13:46 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:13:46 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:13:46 2012] Source does appear to be extended
[Thu Mar 22 06:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 06:14:25 2012] XMMSAS src. selection expression = ellipse(22981.452000, 27225.614000, 896.490026, 896.490026, 0.000000, X, Y)
[Thu Mar 22 06:14:25 2012] Writing source region out to fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src56_src.reg
[Thu Mar 22 06:14:25 2012] Extracting stamp from image fullrun_pn_xmm0093650301_pi300-10000_cl_sm2.00.img.gz, (213, 262) - (316, 365)
[Thu Mar 22 06:14:26 2012] XMMSAS bgd. selection expression = annulus(22981.452000, 27225.614000, 1494.150043, 2988.300086, X, Y) && !ellipse(25502.168600, 23831.505600, 1811.176852, 1811.176852, 0.000000, X, Y) && !ellipse(24295.422000, 24707.240000, 1185.840034, 1185.840034, 0.000000, X, Y) && !ellipse(23565.946000, 25177.266000, 807.912023, 807.912023, 0.000000, X, Y) && !ellipse(25288.691498, 25343.398376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26370.480530, 24995.005432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.273689, 26058.051495, 1241.192036, 564.492696, 36.343450, X, Y) && !ellipse(21516.932140, 29087.360120, 669.249619, 669.249619, 0.000000, X, Y) && !ellipse(26687.472443, 28478.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19009.673947, 32647.393167, 3252.048094, 2645.119834, 261.729967, X, Y) && !ellipse(19629.616000, 31766.976000, 2579.328074, 2579.328074, 0.000000, X, Y) && !ellipse(20349.110000, 30817.004000, 1562.880045, 1562.880045, 0.000000, X, Y) && !ellipse(20647.476000, 30382.640000, 1525.464044, 1525.464044, 0.000000, X, Y) && !ellipse(21037.274000, 29895.224000, 1476.552042, 1476.552042, 0.000000, X, Y) && !ellipse(26394.012054, 28927.719788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22197.451800, 28262.061800, 741.307221, 283.066408, 228.798000, X, Y) && !ellipse(22573.528000, 27854.156000, 1248.432036, 1248.432036, 0.000000, X, Y) && !ellipse(22934.250000, 27272.554000, 1201.744035, 1201.744035, 0.000000, X, Y) && !ellipse(25416.490000, 26983.929400, 1123.616032, 1123.616032, 0.000000, X, Y) && !ellipse(24155.763947, 26383.774261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19610.591415, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23105.691895, 24666.071198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.583221, 24042.181793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.502000, 23778.388000, 861.816025, 861.816025, 0.000000, X, Y)
[Thu Mar 22 06:14:26 2012] Writing fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src56.gif
[Thu Mar 22 07:06:12 2012] Mean detx,y = (532.84, 4199.87) 
[Thu Mar 22 07:06:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 07:06:55 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 07:06:56 2012] Setting source spectrum file to fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Mar 22 07:06:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Thu Mar 22 17:25:01 2012] Updating aperture counts using extracted products
[Thu Mar 22 17:25:01 2012] Error reading totcts from fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Mar 22 17:25:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 17:25:05 2012] Using photon index=1.80, rate=0.0278, arf fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src56.arf
[Thu Mar 22 17:25:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 17:25:05 2012] Updating source flux to 8.2e-14
[Thu Mar 22 17:36:09 2012] Flag b found in src. 56 procflags, skipping spectral fitting
[Thu Mar 22 17:36:09 2012] Flag c found in src. 56 procflags, skipping spectral fitting