[Wed Mar 21 09:32:28 2012] Detection parameters:
  Position = (260.3, 320.0) = 13 25 40.97 -42 57 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.2 +/- 15.2
  Background counts = 30.3
  Rate = 0.01 +/- 0.002

[Wed Mar 21 09:32:29 2012] Off-axis axis estimate = 3.17'
[Wed Mar 21 09:35:47 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 09:35:47 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Wed Mar 21 09:35:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Wed Mar 21 09:35:47 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.02"
[Wed Mar 21 15:10:53 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src47.ximg exists
[Wed Mar 21 15:10:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src47.csv
[Wed Mar 21 15:10:53 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed Mar 21 15:10:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src47.csv
[Wed Mar 21 15:10:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 15:10:55 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed Mar 21 15:10:55 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Mar 21 15:10:55 2012] Fit fullrun_pn_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Wed Mar 21 21:29:10 2012] Warning, spatial fit 47 centroid is now closest to src. 49
[Wed Mar 21 21:29:10 2012] Spatial fit model total counts = 718.639000, observed total counts = 714.000000
[Wed Mar 21 21:29:10 2012] Offset between fit and detection position for source 50 = 0.793161 pixels
[Wed Mar 21 21:29:10 2012] Warning, changing simple spatial fit ID from 47 to 49
[Wed Mar 21 21:29:10 2012] 693.861000 total counts/ 425.876000 bgd. counts: snr = 12.985806
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.793161 pixels
  Position = (260.0, 320.7) = 13 25 41.08 -42 57 48.1
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 268.0 +/- 26.3
  Background counts = 425.9
  Rate = 0.03 +/- 0.003
[Wed Mar 21 21:29:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 21:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 21:29:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 21:29:10 2012] Source does appear to be extended
[Wed Mar 21 21:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 21:29:10 2012] Source is confused with source 49
[Wed Mar 21 21:30:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 21:30:02 2012] Initial guess for spatial extent in simple fitting = 15.61"
[Wed Mar 21 21:30:02 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.958
[Wed Mar 21 21:30:02 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 15.61"
[Thu Mar 22 02:38:20 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src41.ximg exists
[Thu Mar 22 02:38:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src41.csv
[Thu Mar 22 02:38:20 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Mar 22 02:38:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src41.csv
[Thu Mar 22 02:38:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 02:38:23 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Mar 22 02:38:23 2012] fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Mar 22 02:38:23 2012] Fit fullrun_pn_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Thu Mar 22 06:13:46 2012] Warning, spatial fit 41 centroid is now closest to src. 56
[Thu Mar 22 06:13:46 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:13:46 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:13:46 2012] Source does appear to be extended
[Thu Mar 22 06:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 06:14:25 2012] XMMSAS src. selection expression = ellipse(22573.528000, 27854.156000, 936.324027, 936.324027, 0.000000, X, Y)
[Thu Mar 22 06:14:25 2012] Writing source region out to fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src50_src.reg
[Thu Mar 22 06:14:25 2012] Extracting stamp from image fullrun_pn_xmm0093650301_pi300-10000_cl_sm2.00.img.gz, (206, 267) - (314, 375)
[Thu Mar 22 06:14:25 2012] XMMSAS bgd. selection expression = annulus(22573.528000, 27854.156000, 1560.540045, 3121.080090, X, Y) && !ellipse(25502.168600, 23831.505600, 1811.176852, 1811.176852, 0.000000, X, Y) && !ellipse(24295.422000, 24707.240000, 1185.840034, 1185.840034, 0.000000, X, Y) && !ellipse(23565.946000, 25177.266000, 807.912023, 807.912023, 0.000000, X, Y) && !ellipse(25288.691498, 25343.398376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26370.480530, 24995.005432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.273689, 26058.051495, 1241.192036, 564.492696, 36.343450, X, Y) && !ellipse(21516.932140, 29087.360120, 669.249619, 669.249619, 0.000000, X, Y) && !ellipse(19009.673947, 32647.393167, 3252.048094, 2645.119834, 261.729967, X, Y) && !ellipse(19629.616000, 31766.976000, 2579.328074, 2579.328074, 0.000000, X, Y) && !ellipse(20349.110000, 30817.004000, 1562.880045, 1562.880045, 0.000000, X, Y) && !ellipse(20647.476000, 30382.640000, 1525.464044, 1525.464044, 0.000000, X, Y) && !ellipse(21037.274000, 29895.224000, 1476.552042, 1476.552042, 0.000000, X, Y) && !ellipse(26394.012054, 28927.719788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22197.451800, 28262.061800, 741.307221, 283.066408, 228.798000, X, Y) && !ellipse(22934.250000, 27272.554000, 1201.744035, 1201.744035, 0.000000, X, Y) && !ellipse(25416.490000, 26983.929400, 1123.616032, 1123.616032, 0.000000, X, Y) && !ellipse(22981.452000, 27225.614000, 1195.320034, 1195.320034, 0.000000, X, Y) && !ellipse(24155.763947, 26383.774261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19610.591415, 25886.312042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23105.691895, 24666.071198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.583221, 24042.181793, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 06:14:25 2012] Writing fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src50.gif
[Thu Mar 22 07:02:49 2012] Mean detx,y = (492.39, 5019.72) 
[Thu Mar 22 07:02:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 07:04:06 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 07:04:07 2012] Setting source spectrum file to fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Mar 22 07:04:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu Mar 22 17:25:01 2012] Updating aperture counts using extracted products
[Thu Mar 22 17:25:01 2012] Error reading totcts from fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Mar 22 17:25:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 17:25:05 2012] Using photon index=1.80, rate=0.0301, arf fullrun_pn_xmm0093650301_pi300-10000_pass1_cl_src50.arf
[Thu Mar 22 17:25:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 17:25:05 2012] Updating source flux to 9.2e-14
[Thu Mar 22 17:36:09 2012] Flag c found in src. 50 procflags, skipping spectral fitting