[Wed Mar 21 09:33:46 2012] Detection parameters:
  Position = (280.3, 297.0) = 13 25 33.05 -42 59 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 13.9
  Background counts = 25.1
  Rate = 0.005 +/- 0.001

[Wed Mar 21 09:33:47 2012] Off-axis axis estimate = 1.32'
[Wed Mar 21 18:16:36 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 18:16:36 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Wed Mar 21 18:16:36 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Wed Mar 21 18:16:36 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.09"
[Wed Mar 21 21:28:44 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_src28.ximg exists
[Wed Mar 21 21:28:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_src28.csv
[Wed Mar 21 21:28:44 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Mar 21 21:28:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_src28.csv
[Wed Mar 21 21:28:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 21:28:45 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Mar 21 21:28:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Mar 21 21:28:45 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Mar 21 21:28:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Mar 21 21:28:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 21:29:38 2012] Source 39 is offset by -5.119980 and 5.521341 pixels which is larger than
2 X fitted extent = 3.108768 x 0.814745, not incorporating fit results
[Wed Mar 21 21:29:38 2012] Spatial fit model total counts = 637.697000, observed total counts = 551.000000
[Wed Mar 21 21:29:38 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 21 21:29:38 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 21:29:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 21:29:38 2012] Assessing source extent using major
[Wed Mar 21 21:29:38 2012] Source does appear to be extended
[Wed Mar 21 21:29:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 04:29:22 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 04:29:22 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Thu Mar 22 04:29:22 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Thu Mar 22 04:29:22 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.09"
[Thu Mar 22 06:13:22 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_src20.ximg exists
[Thu Mar 22 06:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_src20.csv
[Thu Mar 22 06:13:22 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Mar 22 06:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_src20.csv
[Thu Mar 22 06:13:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:13:22 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Mar 22 06:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 22 06:13:22 2012] fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Mar 22 06:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 22 06:13:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:14:05 2012] Source 39 is offset by -4.539161 and 5.521341 pixels which is larger than
2 X fitted extent = 1.983637 x 6.517977, not incorporating fit results
[Thu Mar 22 06:14:05 2012] Spatial fit model total counts = 639.060000, observed total counts = 551.000000
[Thu Mar 22 06:14:05 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 22 06:14:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:14:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:14:05 2012] Assessing source extent using major
[Thu Mar 22 06:14:05 2012] Source does appear to be extended
[Thu Mar 22 06:14:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 15:33:43 2012] XMMSAS src. selection expression = ellipse(24337.121033, 25790.794708, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 15:33:43 2012] Writing source region out to fullrun_mos2_xmm0093650301_pi300-10000_pass1_cl_src39_src.reg
[Thu Mar 22 15:33:43 2012] Extracting stamp from image fullrun_mos2_xmm0093650301_pi300-10000_cl_sm2.00.img.gz, (243, 260) - (318, 335)
[Thu Mar 22 15:33:43 2012] XMMSAS bgd. selection expression = annulus(24337.121033, 25790.794708, 1087.500000, 2175.000000, X, Y) && !ellipse(25530.594000, 23861.097600, 1447.939242, 1447.939242, 0.000000, X, Y) && !ellipse(25135.676849, 23661.469177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.708000, 24486.148000, 1598.448046, 1598.448046, 0.000000, X, Y) && !ellipse(23588.157400, 25127.298800, 668.828819, 668.828819, 0.000000, X, Y) && !ellipse(26387.058533, 24909.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22201.234800, 26165.116600, 581.508817, 581.508817, 0.000000, X, Y) && !ellipse(23635.569366, 23911.795959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23012.754000, 23565.288000, 1230.920035, 1230.920035, 0.000000, X, Y) && !ellipse(22274.903200, 26094.841200, 1163.016033, 349.194410, 39.570000, X, Y)
[Thu Mar 22 15:33:43 2012] Writing fullrun_mos2_xmm0093650301_pi300-10000_pass1_cl_src39.gif
[Thu Mar 22 15:53:45 2012] Mean detx,y = (-166.96, -2368.32) 
[Thu Mar 22 15:53:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 15:54:08 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 15:54:08 2012] Setting source spectrum file to fullrun_mos2_xmm0093650301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Mar 22 15:54:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0093650301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Mar 22 17:07:06 2012] Not generating rmf since there are only 63 counts
[Thu Mar 22 17:07:06 2012] rmf not generated due to insufficient counts
[Thu Mar 22 17:25:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 17:25:14 2012] Error reading totcts from fullrun_mos2_xmm0093650301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Mar 22 17:25:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 17:25:15 2012] Using photon index=1.80, rate=0.00503, arf fullrun_mos2_xmm0093650301_pi300-10000_pass1_cl_src39.arf
[Thu Mar 22 17:25:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 17:25:15 2012] Updating source flux to 5.6e-14
[Thu Mar 22 17:32:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting