[Wed Mar 21 09:33:07 2012] Detection parameters:
  Position = (315.8, 268.1) = 13 25 18.99 -43 1 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 14.5
  Background counts = 25.1
  Rate = 0.006 +/- 0.001

[Wed Mar 21 09:33:08 2012] Off-axis axis estimate = 2.53'
[Wed Mar 21 15:10:55 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 15:10:55 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Mar 21 15:10:55 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.874
[Wed Mar 21 15:10:55 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.69"
[Wed Mar 21 18:16:33 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src23.ximg exists
[Wed Mar 21 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src23.csv
[Wed Mar 21 18:16:33 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Mar 21 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src23.csv
[Wed Mar 21 18:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:16:35 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Mar 21 18:16:35 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Mar 21 18:16:35 2012] Fit fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Mar 21 21:29:25 2012] Warning, spatial fit 23 centroid is now closest to src. 42
[Wed Mar 21 21:29:25 2012] Spatial fit model total counts = 565.478000, observed total counts = 560.000000
[Wed Mar 21 21:29:25 2012] Offset between fit and detection position for source 40 = 5.052130 pixels
[Wed Mar 21 21:29:25 2012] Warning, changing simple spatial fit ID from 23 to 46
[Wed Mar 21 21:29:25 2012] 561.689000 total counts/ 432.185000 bgd. counts: snr = 6.229430
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 5.052130 pixels
  Position = (310.7, 267.7) = 13 25 20.98 -43 1 38.8
  Extent = 15.8 (15.8-31.6)", rotation angle = 0
  Source counts = 129.5 +/- 23.7
  Background counts = 432.2
  Rate = 0.01 +/- 0.002
[Wed Mar 21 21:29:25 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 21:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 21:29:25 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 21:29:25 2012] Source does appear to be extended
[Wed Mar 21 21:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 02:38:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 02:38:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 02:38:24 2012] Initial guess for spatial extent in simple fitting = 15.82"
[Thu Mar 22 02:38:24 2012] source mask rpix=3.6, npix_max = 68, mask sum = 62, frac = 0.905
[Thu Mar 22 02:38:24 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 15.82"
[Thu Mar 22 04:29:21 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src22.ximg exists
[Thu Mar 22 04:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src22.csv
[Thu Mar 22 04:29:21 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Mar 22 04:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src22.csv
[Thu Mar 22 04:29:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 04:29:22 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Mar 22 04:29:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Mar 22 04:29:22 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Mar 22 04:29:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Mar 22 04:29:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:13:56 2012] Warning, spatial fit 22 centroid is now closest to src. 46
[Thu Mar 22 06:13:56 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:13:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:13:56 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:13:56 2012] Source does appear to be extended
[Thu Mar 22 06:13:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 10:31:26 2012] XMMSAS src. selection expression = ellipse(26984.808000, 23241.822000, 949.392027, 949.392027, 0.000000, X, Y)
[Thu Mar 22 10:31:26 2012] Writing source region out to fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src40_src.reg
[Thu Mar 22 10:31:26 2012] Extracting stamp from image fullrun_mos1_xmm0093650301_pi300-10000_cl_sm2.00.img.gz, (256, 213) - (365, 322)
[Thu Mar 22 10:31:26 2012] XMMSAS bgd. selection expression = annulus(26984.808000, 23241.822000, 1582.320046, 3164.640091, X, Y) && !ellipse(25525.001400, 23822.672800, 2569.584074, 2569.584074, 0.000000, X, Y) && !ellipse(24295.528000, 24708.750000, 1186.056034, 1186.056034, 0.000000, X, Y) && !ellipse(29913.235400, 20212.647000, 364.274410, 364.274410, 0.000000, X, Y) && !ellipse(26420.371185, 24821.483337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23406.718000, 25363.794000, 1955.600056, 1955.600056, 0.000000, X, Y) && !ellipse(25404.589400, 24900.012000, 1080.056031, 1080.056031, 0.000000, X, Y) && !ellipse(26178.832550, 25245.207428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.636800, 23669.208200, 359.950410, 359.950410, 0.000000, X, Y) && !ellipse(23778.834747, 23785.119202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28713.833282, 23660.327515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.856600, 26379.546020, 336.725610, 336.725610, 0.000000, X, Y) && !ellipse(30454.564800, 19605.441400, 1000.616029, 1000.616029, 0.000000, X, Y) && !ellipse(24549.895081, 22234.380310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29529.206000, 19029.858000, 1541.600044, 1008.784029, 349.847000, X, Y) && !ellipse(23781.840240, 23007.378815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.528000, 22738.980000, 1231.040035, 1231.040035, 0.000000, X, Y) && !ellipse(31052.590000, 23009.402000, 1374.432040, 1374.432040, 0.000000, X, Y)
[Thu Mar 22 10:31:26 2012] Writing fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src40.gif
[Thu Mar 22 11:13:01 2012] Mean detx,y = (1074.46, -476.90) 
[Thu Mar 22 11:13:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 11:13:19 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 11:13:19 2012] Setting source spectrum file to fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Mar 22 11:13:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Mar 22 17:25:09 2012] Updating aperture counts using extracted products
[Thu Mar 22 17:25:09 2012] Error reading totcts from fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Mar 22 17:25:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 17:25:11 2012] Using photon index=1.80, rate=0.00969, arf fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src40.arf
[Thu Mar 22 17:25:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 17:25:11 2012] Updating source flux to 9.3e-14