[Wed Mar 21 09:33:06 2012] Detection parameters:
  Position = (293.7, 274.2) = 13 25 27.74 -43 1 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34676.0 +/- 220.1
  Background counts = 33.5
  Rate = 3 +/- 0.02

[Wed Mar 21 09:33:08 2012] Off-axis axis estimate = 1.79'
[Wed Mar 21 15:10:55 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 15:10:55 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Mar 21 15:10:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Wed Mar 21 15:10:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Wed Mar 21 18:16:33 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 21 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 18:16:33 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 21 18:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 21 18:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:16:34 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 21 18:16:34 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 21 18:16:34 2012] Fit fullrun_mos1_xmm0093650301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 21 21:29:24 2012] Spatial fit model total counts = 38297.700000, observed total counts = 38334.000000
[Wed Mar 21 21:29:24 2012] Offset between fit and detection position for source 1 = 0.295533 pixels
[Wed Mar 21 21:29:24 2012] 38439.720000 total counts/ 9593.920000 bgd. counts: snr = 294.499486
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.295533 pixels
  Position = (293.6, 274.4) = 13 25 27.79 -43 1 9.6
  Extent = 8.7 (8.6-8.7)", rotation angle = 0
  Source counts = 28845.8 +/- 196.1
  Background counts = 9593.9
  Rate = 2 +/- 0.01
[Wed Mar 21 21:29:25 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 21:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 21:29:25 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 21:29:25 2012] Source does appear to be extended
[Wed Mar 21 21:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 02:38:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 02:38:24 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Thu Mar 22 02:38:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Thu Mar 22 02:38:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.66"
[Thu Mar 22 04:29:21 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 22 04:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 04:29:21 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 22 04:29:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 04:29:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 04:29:21 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 22 04:29:21 2012] fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 22 04:29:21 2012] Fit fullrun_mos1_xmm0093650301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 22 06:13:56 2012] Spatial fit model total counts = 38020.100000, observed total counts = 38334.000000
[Thu Mar 22 06:13:56 2012] Offset between fit and detection position for source 1 = 0.378626 pixels
[Thu Mar 22 06:13:56 2012] 37336.630000 total counts/ 1484.430000 bgd. counts: snr = 930.541934
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.378626 pixels
  Position = (293.9, 274.4) = 13 25 27.64 -43 1 9.7
  Extent = 10.7 (10.7-10.7)", rotation angle = 0
  Source counts = 35852.2 +/- 193.2
  Background counts = 1484.4
  Rate = 3 +/- 0.01
[Thu Mar 22 06:13:56 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:13:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:13:56 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:13:56 2012] Source does appear to be extended
[Thu Mar 22 06:13:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 10:31:25 2012] Counts = 35852.200000, rescaling region sizes by 3.000000
[Thu Mar 22 10:31:25 2012] XMMSAS src. selection expression = ellipse(25525.001400, 23822.672800, 1927.188055, 1927.188055, 0.000000, X, Y)
[Thu Mar 22 10:31:25 2012] Writing source region out to fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 22 10:31:25 2012] Extracting stamp from image fullrun_mos1_xmm0093650301_pi300-10000_cl_sm2.00.img.gz, (183, 164) - (405, 385)
[Thu Mar 22 10:31:25 2012] XMMSAS bgd. selection expression = annulus(25525.001400, 23822.672800, 9635.940277, 19271.880555, X, Y) && !ellipse(24295.528000, 24708.750000, 1186.056034, 1186.056034, 0.000000, X, Y) && !ellipse(18669.748596, 19765.816376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.235400, 20212.647000, 364.274410, 364.274410, 0.000000, X, Y) && !ellipse(18120.192820, 18620.336400, 517.865615, 517.865615, 0.000000, X, Y) && !ellipse(26420.371185, 24821.483337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22355.779200, 12367.369400, 423.896812, 423.896812, 0.000000, X, Y) && !ellipse(23406.718000, 25363.794000, 1955.600056, 1955.600056, 0.000000, X, Y) && !ellipse(21473.012161, 11941.244583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.860400, 22686.336200, 335.697610, 335.697610, 0.000000, X, Y) && !ellipse(30952.660000, 21914.596400, 329.856009, 329.856009, 0.000000, X, Y) && !ellipse(25404.589400, 24900.012000, 1080.056031, 1080.056031, 0.000000, X, Y) && !ellipse(20710.214184, 34004.407639, 539.529842, 316.422215, 353.305298, X, Y) && !ellipse(26178.832550, 25245.207428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29871.636800, 23669.208200, 359.950410, 359.950410, 0.000000, X, Y) && !ellipse(22323.993540, 26084.832400, 1076.584031, 456.571213, 34.520000, X, Y) && !ellipse(23778.834747, 23785.119202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28713.833282, 23660.327515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37496.307200, 29666.016600, 457.796813, 457.796813, 0.000000, X, Y) && !ellipse(32254.394501, 15338.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.856600, 26379.546020, 336.725610, 336.725610, 0.000000, X, Y) && !ellipse(26984.808000, 23241.822000, 1265.856036, 1265.856036, 0.000000, X, Y) && !ellipse(30454.564800, 19605.441400, 1000.616029, 1000.616029, 0.000000, X, Y) && !ellipse(24549.895081, 22234.380310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29529.206000, 19029.858000, 1541.600044, 1008.784029, 349.847000, X, Y) && !ellipse(12822.673157, 21572.012894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23781.840240, 23007.378815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.528000, 22738.980000, 1231.040035, 1231.040035, 0.000000, X, Y) && !ellipse(31052.590000, 23009.402000, 1374.432040, 1374.432040, 0.000000, X, Y)
[Thu Mar 22 10:31:25 2012] Writing fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1.gif
[Thu Mar 22 10:31:43 2012] Mean detx,y = (8.84, 217.46) 
[Thu Mar 22 10:31:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 10:48:47 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 10:48:47 2012] Setting source spectrum file to fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 10:48:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 22 17:25:08 2012] Updating aperture counts using extracted products
[Thu Mar 22 17:25:08 2012] Error reading totcts from fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 17:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 17:25:10 2012] Using photon index=1.80, rate=2.68, arf fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 17:25:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 17:25:10 2012] Updating source flux to 2.3e-11
[Thu Mar 22 17:32:42 2012] Reading fit data from xmm0093650301/analysis//spectral/fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 22 17:32:42 2012] Spectral fit parameter nH value = 9.58152e+14
[Thu Mar 22 17:32:42 2012] Spectral fit parameter PhoIndex value = -0.643864
[Thu Mar 22 17:32:42 2012] Failed to get F(0.3-8.0) from xmm0093650301/analysis//spectral/fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 17:32:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 17:32:42 2012] Using Nh = 9.6e+14, photon index=-0.64, rate=2.68, arf fullrun_mos1_xmm0093650301_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 17:32:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 17:32:42 2012] Updating source flux to 7.6e-11