[Sun Jul 22 10:24:29 2012] Detection parameters:
  Position = (253.3, 286.9) = 13 25 47.45 -43 0 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.8 +/- 15.6
  Background counts = 61.1
  Rate = 0.006 +/- 0.001

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 3.38'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Sun Jul 22 10:31:04 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.893
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 8.12"
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src90.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src90.csv
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src90_1.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src90.csv
[Sun Jul 22 18:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:24 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Sun Jul 22 18:53:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src90.csv
[Sun Jul 22 18:53:24 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Sun Jul 22 18:53:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src90.csv
[Sun Jul 22 18:53:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:35 2012] Spatial fit model total counts = 1184.490000, observed total counts = 1177.000000
[Mon Jul 23 00:53:35 2012] Offset between fit and detection position for source 97 = 0.575943 pixels
[Mon Jul 23 00:53:35 2012] Warning, changing simple spatial fit ID from 90 to 89
[Mon Jul 23 00:53:35 2012] 1191.566200 total counts/ 1149.000000 bgd. counts: snr = 1.255755
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.575943 pixels
  Position = (253.8, 286.6) = 13 25 47.25 -43 0 33.8
  Extent = 5.8 (2.3-9.9)", rotation angle = 0
  Source counts = 42.6 +/- 34.5
  Background counts = 1149.0
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability