[Sun Jul 22 10:24:28 2012] Detection parameters:
  Position = (354.8, 224.1) = 13 25 7.18 -43 5 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.9 +/- 22.9
  Background counts = 42.0
  Rate = 0.02 +/- 0.002

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 6.76'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Sun Jul 22 10:31:04 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.186
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.81"
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src71.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src71.csv
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src71.csv
[Sun Jul 22 18:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun Jul 22 18:53:23 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Mon Jul 23 00:53:35 2012] Warning, spatial fit 71 centroid is now closest to src. 73
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Source is confused with source 73
[Mon Jul 23 00:54:19 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Mon Jul 23 00:54:19 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.186
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 9.81"
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src57.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src57.csv
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src57_1.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src57.csv
[Mon Jul 23 05:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Jul 23 05:45:32 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Mon Jul 23 13:51:26 2012] Spatial fit model total counts = 1585.390000, observed total counts = 1595.000000
[Mon Jul 23 13:51:26 2012] Offset between fit and detection position for source 76 = 8.256127 pixels
[Mon Jul 23 13:51:26 2012] 1727.110000 total counts/ 653.030000 bgd. counts: snr = 42.031033
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 8.256127 pixels
  Position = (348.3, 219.0) = 13 25 9.76 -43 5 28.0
  Extent = 19.6 (19.5-39.2)", rotation angle = 0
  Source counts = 1074.1 +/- 41.6
  Background counts = 653.0
  Rate = 0.06 +/- 0.002
[Mon Jul 23 13:51:26 2012] Spatial fit model total counts = 1224.310000, observed total counts = 1229.000000
[Mon Jul 23 13:51:26 2012] Offset between fit and detection position for source 76 = 1.540747 pixels
[Mon Jul 23 13:51:26 2012] Warning, changing simple spatial fit ID from 57 to 58
[Mon Jul 23 13:51:26 2012] 1255.115000 total counts/ 888.637000 bgd. counts: snr = 12.293788
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 1.540747 pixels
  Position = (349.5, 219.9) = 13 25 9.27 -43 5 23.9
  Extent = 14.0 (13.0-27.9)" x 6.2 (5.2-7.2)", rotation angle = 137 (131-144) degrees
  Source counts = 366.5 +/- 35.4
  Background counts = 888.6
  Rate = 0.02 +/- 0.002
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.80
[Mon Jul 23 13:51:26 2012] Source is asymmetric
[Mon Jul 23 13:52:04 2012] XMMSAS src. selection expression = ellipse(30358.245000, 19083.601160, 837.930024, 371.251811, 136.903000, X, Y)
[Mon Jul 23 13:52:04 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src76_src.reg
[Mon Jul 23 13:52:04 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (301, 172) - (398, 268)
[Mon Jul 23 13:52:04 2012] XMMSAS bgd. selection expression = annulus(30358.245000, 19083.601160, 1396.550040, 2793.100080, X, Y) && !ellipse(30725.992371, 20558.324036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(31769.653400, 22269.177800, 393.605611, 393.605611, 0.000000, X, Y) && !ellipse(32123.534920, 17478.371000, 417.228812, 417.228812, 0.000000, X, Y) && !ellipse(30974.699585, 22712.505951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.434800, 20922.750900, 915.472026, 915.472026, 0.000000, X, Y) && !ellipse(31185.962000, 19967.378000, 1569.592045, 1569.592045, 0.000000, X, Y) && !ellipse(28307.510000, 19848.706000, 1443.584042, 1443.584042, 0.000000, X, Y) && !ellipse(30274.637400, 19023.038800, 558.619216, 558.619216, 0.000000, X, Y) && !ellipse(30016.796875, 17897.488190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33087.771027, 15682.597702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.475922, 21763.177658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.999054, 20488.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28450.714569, 20229.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.148743, 19722.015030, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:04 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src76.gif
[Mon Jul 23 15:19:52 2012] Mean detx,y = (-537.73, -6600.28) 
[Mon Jul 23 15:19:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:20:13 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:20:13 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Mon Jul 23 15:20:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue Jul 24 06:52:58 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Jul 24 06:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:00 2012] Using photon index=1.80, rate=0.019, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src76.arf
[Tue Jul 24 06:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:00 2012] Updating source flux to 7.9e-14
[Tue Jul 24 06:59:50 2012] Flag c found in src. 76 procflags, skipping spectral fitting