[Sun Jul 22 10:24:27 2012] Detection parameters:
  Position = (336.8, 241.1) = 13 25 14.30 -43 3 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.7 +/- 18.5
  Background counts = 53.7
  Rate = 0.009 +/- 0.001

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 5.00'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Sun Jul 22 10:31:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.93"
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src68.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src68.csv
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src68_1.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src68.csv
[Sun Jul 22 18:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sun Jul 22 18:53:23 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Mon Jul 23 00:53:35 2012] Spatial fit model total counts = 1172.000000, observed total counts = 1172.000000
[Mon Jul 23 00:53:35 2012] Offset between fit and detection position for source 71 = 2.382848 pixels
[Mon Jul 23 00:53:35 2012] 1138.562000 total counts/ 999.859000 bgd. counts: snr = 4.386483
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 2.382848 pixels
  Position = (334.5, 240.6) = 13 25 15.23 -43 3 54.0
  Extent = 12.8 (6.4-17.9)", rotation angle = 0
  Source counts = 138.7 +/- 33.7
  Background counts = 999.9
  Rate = 0.007 +/- 0.002
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Source is confused with source 115
[Mon Jul 23 00:54:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Mon Jul 23 00:54:19 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.028
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 12.84"
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src54.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src54.csv
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src54.csv
[Mon Jul 23 05:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon Jul 23 05:45:32 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon Jul 23 13:51:26 2012] Spatial fit model total counts = 1470.910000, observed total counts = 1460.000000
[Mon Jul 23 13:51:26 2012] Offset between fit and detection position for source 71 = 0.792281 pixels
[Mon Jul 23 13:51:26 2012] 1440.149000 total counts/ 1336.360000 bgd. counts: snr = 2.839158
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 0.792281 pixels
  Position = (335.2, 241.0) = 13 25 14.97 -43 3 52.0
  Extent = 11.4 (6.2-25.7)", rotation angle = 0
  Source counts = 103.8 +/- 37.9
  Background counts = 1336.4
  Rate = 0.005 +/- 0.002
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:52:03 2012] XMMSAS src. selection expression = ellipse(29110.434800, 20922.750900, 686.604020, 686.604020, 0.000000, X, Y)
[Mon Jul 23 13:52:03 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src71_src.reg
[Mon Jul 23 13:52:03 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (296, 202) - (375, 281)
[Mon Jul 23 13:52:04 2012] XMMSAS bgd. selection expression = annulus(29110.434800, 20922.750900, 1144.340033, 2288.680066, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(30725.992371, 20558.324036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25314.840000, 24642.486000, 2442.016070, 2442.016070, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(26806.895660, 22959.256409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31769.653400, 22269.177800, 393.605611, 393.605611, 0.000000, X, Y) && !ellipse(28258.086884, 23900.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30974.699585, 22712.505951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26221.249298, 22044.154099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31185.962000, 19967.378000, 1569.592045, 1569.592045, 0.000000, X, Y) && !ellipse(28307.510000, 19848.706000, 1443.584042, 1443.584042, 0.000000, X, Y) && !ellipse(30358.245000, 19083.601160, 1117.240032, 495.002414, 136.903000, X, Y) && !ellipse(30274.637400, 19023.038800, 558.619216, 558.619216, 0.000000, X, Y) && !ellipse(30016.796875, 17897.488190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31330.022156, 23703.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.475922, 21763.177658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.999054, 20488.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28450.714569, 20229.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.148743, 19722.015030, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:04 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src71.gif
[Mon Jul 23 15:17:17 2012] Mean detx,y = (-627.84, -4421.02) 
[Mon Jul 23 15:17:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:17:38 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:17:39 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon Jul 23 15:17:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue Jul 24 06:52:58 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Jul 24 06:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:00 2012] Using photon index=1.80, rate=0.00538, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src71.arf
[Tue Jul 24 06:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:00 2012] Updating source flux to 1.8e-14
[Tue Jul 24 06:59:50 2012] Flag c found in src. 71 procflags, skipping spectral fitting