[Sun Jul 22 10:24:27 2012] Detection parameters:
  Position = (302.0, 253.9) = 13 25 28.15 -43 2 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.3 +/- 29.1
  Background counts = 71.7
  Rate = 0.03 +/- 0.002

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 3.24'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun Jul 22 10:31:04 2012] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.724
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 8.05"
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src67.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src67.csv
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src67.csv
[Sun Jul 22 18:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun Jul 22 18:53:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:35 2012] Source 70 is offset by -7.448077 and 6.337771 pixels which is larger than
2 X fitted extent = 0.924901 x 0.924901, not incorporating fit results
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:19 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Mon Jul 23 00:54:19 2012] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.724
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.05"
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src53.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src53.csv
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src53.csv
[Mon Jul 23 05:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Jul 23 05:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Jul 23 05:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Jul 23 05:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:26 2012] Source 70 is offset by 0.884813 and 4.626277 pixels which is larger than
2 X fitted extent = 0.954722 x 0.954722, not incorporating fit results
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:52:03 2012] XMMSAS src. selection expression = ellipse(26221.249298, 22044.154099, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 13:52:03 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src70_src.reg
[Mon Jul 23 13:52:03 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (264, 216) - (339, 291)
[Mon Jul 23 13:52:03 2012] XMMSAS bgd. selection expression = annulus(26221.249298, 22044.154099, 1087.500000, 2175.000000, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(25314.840000, 24642.486000, 2442.016070, 2442.016070, 0.000000, X, Y) && !ellipse(24829.574000, 25317.278000, 1110.504032, 1110.504032, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(23959.795440, 23016.665200, 397.605611, 397.605611, 0.000000, X, Y) && !ellipse(26806.895660, 22959.256409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.708600, 25622.560000, 1420.544041, 1420.544041, 0.000000, X, Y) && !ellipse(28258.086884, 23900.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.278000, 24249.417400, 1221.008035, 1221.008035, 0.000000, X, Y) && !ellipse(29110.434800, 20922.750900, 915.472026, 915.472026, 0.000000, X, Y) && !ellipse(28307.510000, 19848.706000, 1443.584042, 1443.584042, 0.000000, X, Y) && !ellipse(23240.445251, 23808.987915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.706757, 21681.702774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.999054, 20488.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28450.714569, 20229.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.148743, 19722.015030, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:03 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src70.gif
[Mon Jul 23 15:16:47 2012] Mean detx,y = (1045.60, -1781.12) 
[Mon Jul 23 15:16:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:17:08 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:17:08 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Mon Jul 23 15:17:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Tue Jul 24 02:35:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 02:35:34 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:52:58 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Jul 24 06:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:00 2012] Using photon index=1.80, rate=0.0267, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src70.arf
[Tue Jul 24 06:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:00 2012] Updating source flux to 7.4e-14
[Tue Jul 24 06:59:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting