[Sun Jul 22 10:24:27 2012] Detection parameters:
  Position = (325.4, 275.3) = 13 25 18.87 -43 1 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.7 +/- 24.8
  Background counts = 65.6
  Rate = 0.02 +/- 0.002

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 2.58'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Jul 22 10:31:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.209
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 7.72"
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src61.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src61.csv
[Sun Jul 22 18:53:21 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Jul 22 18:53:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src61.csv
[Sun Jul 22 18:53:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Sun Jul 22 18:53:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:35 2012] Warning, spatial fit 61 centroid is now closest to src. 61
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:19 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Mon Jul 23 00:54:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.209
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 7.72"
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src49.ximg exists
[Mon Jul 23 05:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src49.csv
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Jul 23 05:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src49.csv
[Mon Jul 23 05:45:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Jul 23 05:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Jul 23 05:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon Jul 23 05:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:26 2012] Source 63 is offset by -6.061852 and 6.369007 pixels which is larger than
2 X fitted extent = 1.271412 x 1.271412, not incorporating fit results
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:52:03 2012] XMMSAS src. selection expression = ellipse(28258.086884, 23900.315613, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 13:52:03 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src63_src.reg
[Mon Jul 23 13:52:03 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (288, 238) - (363, 313)
[Mon Jul 23 13:52:03 2012] XMMSAS bgd. selection expression = annulus(28258.086884, 23900.315613, 1087.500000, 2175.000000, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(25314.840000, 24642.486000, 2442.016070, 2442.016070, 0.000000, X, Y) && !ellipse(27184.233734, 25341.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30683.820000, 24034.074000, 394.486411, 394.486411, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(26806.895660, 22959.256409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30373.553162, 26748.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29734.129181, 25213.647095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.535919, 24596.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30974.699585, 22712.505951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26221.249298, 22044.154099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.434800, 20922.750900, 915.472026, 915.472026, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.475922, 21763.177658, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:03 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src63.gif
[Mon Jul 23 15:13:49 2012] Mean detx,y = (-1556.49, -1579.13) 
[Mon Jul 23 15:13:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:14:03 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:14:03 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jul 23 15:14:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Tue Jul 24 02:21:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 02:21:42 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:52:58 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jul 24 06:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:00 2012] Using photon index=1.80, rate=0.0188, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src63.arf
[Tue Jul 24 06:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:00 2012] Updating source flux to 6.5e-14
[Tue Jul 24 06:59:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting