[Sun Jul 22 10:24:26 2012] Detection parameters:
  Position = (259.0, 336.9) = 13 25 45.16 -42 56 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.6 +/- 22.9
  Background counts = 49.9
  Rate = 0.02 +/- 0.002

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 3.99'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Sun Jul 22 10:31:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.43"
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src46.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src46.csv
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src46.csv
[Sun Jul 22 18:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun Jul 22 18:53:23 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Mon Jul 23 00:53:34 2012] Spatial fit model total counts = 1419.580000, observed total counts = 1424.000000
[Mon Jul 23 00:53:34 2012] Offset between fit and detection position for source 48 = 6.091519 pixels
[Mon Jul 23 00:53:34 2012] 1400.394000 total counts/ 852.918000 bgd. counts: snr = 18.746122
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 6.091519 pixels
  Position = (255.4, 341.8) = 13 25 46.60 -42 56 33.7
  Extent = 16.9 (16.6-33.7)", rotation angle = 0
  Source counts = 547.5 +/- 37.4
  Background counts = 852.9
  Rate = 0.03 +/- 0.002
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Source is confused with source 44
[Mon Jul 23 00:54:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 16.85"
[Mon Jul 23 00:54:19 2012] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.059
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 16.85"
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src38.ximg exists
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon Jul 23 05:45:30 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src38 appears to have run properly
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon Jul 23 05:45:32 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Mon Jul 23 13:51:26 2012] Spatial fit model total counts = 2292.750000, observed total counts = 2294.000000
[Mon Jul 23 13:51:26 2012] Offset between fit and detection position for source 48 = 2.049867 pixels
[Mon Jul 23 13:51:26 2012] 2278.408000 total counts/ 1603.270000 bgd. counts: snr = 16.861229
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.049867 pixels
  Position = (254.3, 343.6) = 13 25 47.03 -42 56 26.0
  Extent = 33.7 (33.2-67.4)" x 5.8 (4.8-6.6)", rotation angle = 53 (51-54) degrees
  Source counts = 675.1 +/- 47.7
  Background counts = 1603.3
  Rate = 0.03 +/- 0.002
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.04
[Mon Jul 23 13:51:26 2012] Source is asymmetric
[Mon Jul 23 13:52:03 2012] XMMSAS src. selection expression = ellipse(22077.596200, 29840.976600, 2022.060058, 345.311410, 52.714400, X, Y)
[Mon Jul 23 13:52:03 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src48_src.reg
[Mon Jul 23 13:52:03 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (138, 227) - (371, 460)
[Mon Jul 23 13:52:03 2012] XMMSAS bgd. selection expression = annulus(22077.596200, 29840.976600, 3370.100097, 6740.200194, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(25314.840000, 24642.486000, 2442.016070, 2442.016070, 0.000000, X, Y) && !ellipse(24829.574000, 25317.278000, 1110.504032, 1110.504032, 0.000000, X, Y) && !ellipse(27184.233734, 25341.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(23959.795440, 23016.665200, 397.605611, 397.605611, 0.000000, X, Y) && !ellipse(26806.895660, 22959.256409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23074.059000, 26437.425400, 759.280822, 759.280822, 0.000000, X, Y) && !ellipse(24641.208000, 26192.234000, 1110.528032, 310.017609, 117.864000, X, Y) && !ellipse(21560.010834, 34346.130127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17766.005800, 35699.762480, 525.468015, 525.468015, 0.000000, X, Y) && !ellipse(25171.291412, 36289.099152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.829926, 33901.946381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19110.353363, 33881.043335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19492.584000, 33432.862000, 1720.600050, 1720.600050, 0.000000, X, Y) && !ellipse(19840.992000, 32961.102000, 2739.208079, 2739.208079, 0.000000, X, Y) && !ellipse(20523.816000, 31966.250000, 1612.104046, 1612.104046, 0.000000, X, Y) && !ellipse(20821.194000, 31506.614000, 1568.992045, 1568.992045, 0.000000, X, Y) && !ellipse(15736.457626, 31256.931854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21374.146000, 30786.914000, 1425.040041, 1425.040041, 0.000000, X, Y) && !ellipse(21608.993080, 30469.198920, 2957.744085, 431.354412, 52.390500, X, Y) && !ellipse(27476.148895, 28812.544617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22537.822000, 29145.198000, 1301.272037, 1301.272037, 0.000000, X, Y) && !ellipse(15719.484655, 26995.935655, 454.963332, 312.080740, 109.108245, X, Y) && !ellipse(24952.368000, 26610.088000, 605.850417, 605.850417, 0.000000, X, Y) && !ellipse(24418.708600, 25622.560000, 1420.544041, 1420.544041, 0.000000, X, Y) && !ellipse(29670.535919, 24596.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.086884, 23900.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.278000, 24249.417400, 1221.008035, 1221.008035, 0.000000, X, Y) && !ellipse(22359.758759, 24080.204468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25342.044312, 27083.703705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23240.445251, 23808.987915, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:03 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src48.gif
[Mon Jul 23 15:06:26 2012] Mean detx,y = (-247.94, 6883.88) 
[Mon Jul 23 15:06:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:08:03 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:08:03 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Jul 23 15:08:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue Jul 24 06:52:58 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue Jul 24 06:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:00 2012] Using photon index=1.80, rate=0.035, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src48.arf
[Tue Jul 24 06:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:00 2012] Updating source flux to 1.2e-13
[Tue Jul 24 06:59:50 2012] Flag c found in src. 48 procflags, skipping spectral fitting