[Sun Jul 22 10:24:26 2012] Detection parameters:
  Position = (412.3, 337.2) = 13 24 44.42 -42 56 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.5 +/- 10.9
  Background counts = 21.5
  Rate = 0.003 +/- 0.0006

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 8.72'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Sun Jul 22 10:31:04 2012] source mask rpix=2.5, npix_max = 35, mask sum = 19, frac = 0.535
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 10.79"
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src45.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src45.csv
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src45.csv
[Sun Jul 22 18:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sun Jul 22 18:53:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:34 2012] Source 47 is offset by 7.502498 and 6.396541 pixels which is larger than
2 X fitted extent = 0.896515 x 0.896515, not incorporating fit results
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Deleting source due to low Poisson probability 0.9