[Sun Jul 22 10:24:26 2012] Detection parameters:
  Position = (503.3, 352.6) = 13 24 8.40 -42 55 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 10.1
  Background counts = 15.4
  Rate = 0.003 +/- 0.0005

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 15.37'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 14.11"
[Sun Jul 22 10:31:04 2012] source mask rpix=3.2, npix_max = 56, mask sum = 37, frac = 0.660
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 14.11"
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src42.csv
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src42.csv
[Sun Jul 22 18:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jul 22 18:53:23 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jul 22 18:53:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jul 22 18:53:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:34 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 12.344882 pixels away
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Deleting source due to low Poisson probability 0.9