[Sun Jul 22 10:24:25 2012] Detection parameters:
  Position = (214.3, 398.0) = 13 26 2.82 -42 52 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.1 +/- 20.5
  Background counts = 27.6
  Rate = 0.01 +/- 0.001

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 9.45'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Sun Jul 22 10:31:04 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.15"
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src27.csv
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src27.csv
[Sun Jul 22 18:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jul 22 18:53:22 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Jul 23 00:53:34 2012] Spatial fit model total counts = 794.616000, observed total counts = 789.000000
[Mon Jul 23 00:53:34 2012] Offset between fit and detection position for source 28 = 7.923089 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 7.923089 pixels
  Position = (209.3, 404.1) = 13 26 4.82 -42 52 2.3
  Extent = 21.1 (19.7-22.3)", rotation angle = 0
  Source counts = 760.5 +/- 27.6
  Background counts = 0.0
  Rate = 0.04 +/- 0.001
 Deleting source due to low signal-to-noise ratio