[Sun Jul 22 10:24:24 2012] Detection parameters:
  Position = (308.7, 264.5) = 13 25 25.48 -43 2 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 846.5 +/- 42.4
  Background counts = 72.7
  Rate = 0.06 +/- 0.003

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 2.57'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Jul 22 10:31:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.016
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.72"
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src13.csv
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src13.csv
[Sun Jul 22 18:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jul 22 18:53:22 2012] Fit fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jul 23 00:53:34 2012] Warning, spatial fit 13 centroid is now closest to src. 11
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Source is confused with source 11
[Mon Jul 23 00:54:19 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Mon Jul 23 00:54:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.016
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.72"
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jul 23 05:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src13.csv
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jul 23 05:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src13.csv
[Mon Jul 23 05:45:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Jul 23 05:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:25 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.557488 pixels away
[Mon Jul 23 13:51:25 2012] Spatial fit model total counts = 4666.110000, observed total counts = 8673.000000
[Mon Jul 23 13:51:25 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:52:02 2012] XMMSAS src. selection expression = ellipse(26806.895660, 22959.256409, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 13:52:02 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src14_src.reg
[Mon Jul 23 13:52:02 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (271, 227) - (346, 302)
[Mon Jul 23 13:52:02 2012] XMMSAS bgd. selection expression = annulus(26806.895660, 22959.256409, 1087.500000, 2175.000000, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(25314.840000, 24642.486000, 2442.016070, 2442.016070, 0.000000, X, Y) && !ellipse(24829.574000, 25317.278000, 1110.504032, 1110.504032, 0.000000, X, Y) && !ellipse(27184.233734, 25341.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(24641.208000, 26192.234000, 1110.528032, 310.017609, 117.864000, X, Y) && !ellipse(24418.708600, 25622.560000, 1420.544041, 1420.544041, 0.000000, X, Y) && !ellipse(29734.129181, 25213.647095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.535919, 24596.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.086884, 23900.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.278000, 24249.417400, 1221.008035, 1221.008035, 0.000000, X, Y) && !ellipse(26221.249298, 22044.154099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.434800, 20922.750900, 915.472026, 915.472026, 0.000000, X, Y) && !ellipse(28307.510000, 19848.706000, 1443.584042, 1443.584042, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.706757, 21681.702774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.999054, 20488.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28450.714569, 20229.249084, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:02 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src14.gif
[Mon Jul 23 14:36:35 2012] Mean detx,y = (-45.78, -1308.08) 
[Mon Jul 23 14:36:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 14:36:59 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 14:36:59 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul 23 14:36:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jul 24 01:22:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 01:22:31 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:52:58 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul 24 06:52:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:52:59 2012] Using photon index=1.80, rate=0.0615, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src14.arf
[Tue Jul 24 06:52:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:00 2012] Updating source flux to 1.8e-13
[Tue Jul 24 06:59:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting