[Sun Jul 22 10:24:24 2012] Detection parameters:
  Position = (313.6, 267.8) = 13 25 23.52 -43 1 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 756.1 +/- 57.4
  Background counts = 70.9
  Rate = 0.05 +/- 0.004

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 2.48'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sun Jul 22 10:31:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.123
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.67"
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src10.csv
[Sun Jul 22 18:53:20 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 22 18:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src10.csv
[Sun Jul 22 18:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 22 18:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 22 18:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 22 18:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:34 2012] Source 11 is offset by -5.688864 and 2.317302 pixels which is larger than
2 X fitted extent = 1.175641 x 2.815048, not incorporating fit results
[Mon Jul 23 00:53:34 2012] Spatial fit model total counts = 8832.390000, observed total counts = 8673.000000
[Mon Jul 23 00:53:34 2012] Offset between fit and detection position for source 11 = 2.920973 pixels
[Mon Jul 23 00:53:34 2012] Warning, changing simple spatial fit ID from 10 to 13
[Mon Jul 23 00:53:34 2012] 8334.080000 total counts/ 5964.340000 bgd. counts: snr = 30.684532
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.920973 pixels
  Position = (315.9, 266.0) = 13 25 22.61 -43 2 3.7
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source counts = 2369.7 +/- 91.3
  Background counts = 5964.3
  Rate = 0.1 +/- 0.005
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:53:35 2012] Source is confused with source 14
[Mon Jul 23 00:54:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 15.43"
[Mon Jul 23 00:54:19 2012] source mask rpix=3.5, npix_max = 65, mask sum = 63, frac = 0.962
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 15.43"
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jul 23 05:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src10.csv
[Mon Jul 23 05:45:30 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jul 23 05:45:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src10.csv
[Mon Jul 23 05:45:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Jul 23 05:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:25 2012] Warning, spatial fit 10 centroid is now closest to src. 14
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:52:02 2012] Counts = 2369.740000, rescaling region sizes by 2.000000
[Mon Jul 23 13:52:02 2012] XMMSAS src. selection expression = ellipse(27437.292000, 23089.991800, 1851.624053, 1851.624053, 0.000000, X, Y)
[Mon Jul 23 13:52:02 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src11_src.reg
[Mon Jul 23 13:52:02 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (210, 160) - (422, 372)
[Mon Jul 23 13:52:02 2012] XMMSAS bgd. selection expression = annulus(27437.292000, 23089.991800, 6172.080178, 12344.160355, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(30725.992371, 20558.324036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19482.998672, 20236.215881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25314.840000, 24642.486000, 2442.016070, 2442.016070, 0.000000, X, Y) && !ellipse(18940.107574, 18813.183899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23172.241180, 12689.104400, 451.236813, 451.236813, 0.000000, X, Y) && !ellipse(24829.574000, 25317.278000, 1110.504032, 1110.504032, 0.000000, X, Y) && !ellipse(27184.233734, 25341.704468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30683.820000, 24034.074000, 394.486411, 394.486411, 0.000000, X, Y) && !ellipse(23959.795440, 23016.665200, 397.605611, 397.605611, 0.000000, X, Y) && !ellipse(26806.895660, 22959.256409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22262.576721, 12244.398483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38378.288605, 30032.249146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23074.059000, 26437.425400, 759.280822, 759.280822, 0.000000, X, Y) && !ellipse(24641.208000, 26192.234000, 1110.528032, 310.017609, 117.864000, X, Y) && !ellipse(31769.653400, 22269.177800, 393.605611, 393.605611, 0.000000, X, Y) && !ellipse(32123.534920, 17478.371000, 417.228812, 417.228812, 0.000000, X, Y) && !ellipse(31141.002655, 12263.047409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21560.010834, 34346.130127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17766.005800, 35699.762480, 525.468015, 525.468015, 0.000000, X, Y) && !ellipse(25171.291412, 36289.099152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32326.313934, 35109.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.829926, 33901.946381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19110.353363, 33881.043335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29339.144280, 33300.232000, 419.216012, 419.216012, 0.000000, X, Y) && !ellipse(30172.339111, 33272.449554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19492.584000, 33432.862000, 1720.600050, 1720.600050, 0.000000, X, Y) && !ellipse(19840.992000, 32961.102000, 2739.208079, 2739.208079, 0.000000, X, Y) && !ellipse(20523.816000, 31966.250000, 1612.104046, 1612.104046, 0.000000, X, Y) && !ellipse(20821.194000, 31506.614000, 1568.992045, 1568.992045, 0.000000, X, Y) && !ellipse(15736.457626, 31256.931854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21374.146000, 30786.914000, 1425.040041, 1425.040041, 0.000000, X, Y) && !ellipse(21608.993080, 30469.198920, 2957.744085, 431.354412, 52.390500, X, Y) && !ellipse(30152.856506, 30162.584534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.596200, 29840.976600, 2696.080078, 460.415213, 52.714400, X, Y) && !ellipse(27476.148895, 28812.544617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22537.822000, 29145.198000, 1301.272037, 1301.272037, 0.000000, X, Y) && !ellipse(15719.484655, 26995.935655, 454.963332, 312.080740, 109.108245, X, Y) && !ellipse(20603.433200, 11195.718200, 679.900020, 679.900020, 0.000000, X, Y) && !ellipse(30373.553162, 26748.155792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24952.368000, 26610.088000, 605.850417, 605.850417, 0.000000, X, Y) && !ellipse(24418.708600, 25622.560000, 1420.544041, 1420.544041, 0.000000, X, Y) && !ellipse(29734.129181, 25213.647095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29670.535919, 24596.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.590088, 24207.972443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.086884, 23900.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.278000, 24249.417400, 1221.008035, 1221.008035, 0.000000, X, Y) && !ellipse(22359.758759, 24080.204468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30974.699585, 22712.505951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22208.589355, 21716.856689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26221.249298, 22044.154099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.434800, 20922.750900, 915.472026, 915.472026, 0.000000, X, Y) && !ellipse(34054.676941, 11596.414688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31185.962000, 19967.378000, 1569.592045, 1569.592045, 0.000000, X, Y) && !ellipse(28307.510000, 19848.706000, 1443.584042, 1443.584042, 0.000000, X, Y) && !ellipse(30358.245000, 19083.601160, 1117.240032, 495.002414, 136.903000, X, Y) && !ellipse(30274.637400, 19023.038800, 558.619216, 558.619216, 0.000000, X, Y) && !ellipse(21353.906219, 18821.741058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22700.417603, 18133.430023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30016.796875, 17897.488190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.830963, 15805.906555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33087.771027, 15682.597702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22169.151550, 13963.702530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25565.521740, 12179.918600, 343.765610, 343.765610, 0.000000, X, Y) && !ellipse(25342.044312, 27083.703705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31330.022156, 23703.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23240.445251, 23808.987915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.475922, 21763.177658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.706757, 21681.702774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.999054, 20488.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28450.714569, 20229.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.148743, 19722.015030, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:02 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src11.gif
[Mon Jul 23 14:29:11 2012] Mean detx,y = (-344.44, -359.49) 
[Mon Jul 23 14:29:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 14:35:27 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 14:35:27 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 23 14:35:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jul 24 06:52:57 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:58 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jul 24 06:52:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:52:59 2012] Using photon index=1.80, rate=0.123, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src11.arf
[Tue Jul 24 06:52:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:52:59 2012] Updating source flux to 3.2e-13
[Tue Jul 24 06:59:50 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Tue Jul 24 06:59:50 2012] Flag c found in src. 11 procflags, skipping spectral fitting