[Sun Jul 22 10:24:29 2012] Detection parameters:
  Position = (345.0, 250.7) = 13 25 11.08 -43 3 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.3 +/- 14.9
  Background counts = 50.4
  Rate = 0.008 +/- 0.001

[Sun Jul 22 10:24:30 2012] Off-axis axis estimate = 4.83'
[Sun Jul 22 10:31:04 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 10:31:04 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Sun Jul 22 10:31:04 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Sun Jul 22 10:31:04 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 8.84"
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src99.ximg exists
[Sun Jul 22 18:53:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src99.csv
[Sun Jul 22 18:53:22 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src99_1.ximg exists
[Sun Jul 22 18:53:22 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src99.csv
[Sun Jul 22 18:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 18:53:24 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Sun Jul 22 18:53:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src99.csv
[Sun Jul 22 18:53:24 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Sun Jul 22 18:53:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src99.csv
[Sun Jul 22 18:53:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass0_tfrozen_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 00:53:35 2012] Spatial fit model total counts = -4081.400000, observed total counts = 845.000000
[Mon Jul 23 00:53:35 2012] Poor agreement between spatial fit and data for source 107
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 00:53:35 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 00:53:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 00:53:35 2012] Assessing source extent using major
[Mon Jul 23 00:53:35 2012] Source does appear to be extended
[Mon Jul 23 00:53:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:54:19 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 00:54:19 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Mon Jul 23 00:54:19 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Mon Jul 23 00:54:19 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 8.84"
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src70.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src70.csv
[Mon Jul 23 05:45:31 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon Jul 23 05:45:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src70.csv
[Mon Jul 23 05:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon Jul 23 05:45:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Jul 23 05:45:32 2012] fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon Jul 23 05:45:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Jul 23 05:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0093650201_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:51:26 2012] Warning, spatial fit 70 centroid is now closest to src. 115
[Mon Jul 23 13:51:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:51:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:51:26 2012] Assessing source extent using major
[Mon Jul 23 13:51:26 2012] Source does appear to be extended
[Mon Jul 23 13:51:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:52:04 2012] XMMSAS src. selection expression = ellipse(29963.475922, 21763.177658, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 13:52:04 2012] Writing source region out to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src107_src.reg
[Mon Jul 23 13:52:04 2012] Extracting stamp from image fullrun_pn_xmm0093650201_pi300-10000_cl_sm2.00.img.gz, (307, 213) - (382, 288)
[Mon Jul 23 13:52:04 2012] XMMSAS bgd. selection expression = annulus(29963.475922, 21763.177658, 1087.500000, 2175.000000, X, Y) && !ellipse(26306.917200, 24155.076400, 2025.201658, 2025.201658, 0.000000, X, Y) && !ellipse(30725.992371, 20558.324036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30683.820000, 24034.074000, 394.486411, 394.486411, 0.000000, X, Y) && !ellipse(27437.292000, 23089.991800, 1234.416036, 1234.416036, 0.000000, X, Y) && !ellipse(31769.653400, 22269.177800, 393.605611, 393.605611, 0.000000, X, Y) && !ellipse(29670.535919, 24596.546600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.086884, 23900.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30974.699585, 22712.505951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.434800, 20922.750900, 915.472026, 915.472026, 0.000000, X, Y) && !ellipse(31185.962000, 19967.378000, 1569.592045, 1569.592045, 0.000000, X, Y) && !ellipse(28307.510000, 19848.706000, 1443.584042, 1443.584042, 0.000000, X, Y) && !ellipse(30358.245000, 19083.601160, 1117.240032, 495.002414, 136.903000, X, Y) && !ellipse(31330.022156, 23703.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.827881, 22209.549149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.999054, 20488.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28450.714569, 20229.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.148743, 19722.015030, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:52:04 2012] Writing fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src107.gif
[Mon Jul 23 15:27:23 2012] Mean detx,y = (-1670.87, -4253.92) 
[Mon Jul 23 15:27:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:27:44 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:27:44 2012] Setting source spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Mon Jul 23 15:27:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src107_bgd.pi.gz
[Tue Jul 24 02:54:14 2012] Not generating rmf since there are only 91 counts
[Tue Jul 24 02:54:14 2012] rmf not generated due to insufficient counts
[Tue Jul 24 06:52:59 2012] Updating aperture counts using extracted products
[Tue Jul 24 06:52:59 2012] Error reading totcts from fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Tue Jul 24 06:53:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 06:53:01 2012] Using photon index=1.80, rate=0.00783, arf fullrun_pn_xmm0093650201_pi300-10000_pass1_cl_src107.arf
[Tue Jul 24 06:53:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 06:53:01 2012] Updating source flux to 3.4e-14
[Tue Jul 24 06:59:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting